Graco 261800 specifications Technical Data

Technical Data

Technical Data

Working pressure range	0-2800 psi (0-19 MPa, 0 -193 bar)
Electric motor	6.3 AMP (open frame, universal)
Operating horsepower	3/8
Maximum delivery (with	0.24 gpm (0.91 lpm)
tip)
Paint hose	1/4 in. x 25 ft
	(6.4 mm x 7.5 m)
Maximum tip hole size	0.015 in. (0.38 mm)
Weight:
Sprayer only	20 lbs. (9.0 Kg)
Sprayer, hose & gun	23 lbs. (10.5 Kg)
Roller	1 lb. (0.5 Kg)
Dimensions:
Length	22.5 in. (57 cm)
Width	14 in. (35.6 cm)
Height	16.5 in. (41.9 cm)
Power cord	18 AWG, 3-wire, 6 ft (1.8 m)
Fluid inlet fitting	3/4 in. internal thread (standard garden hose thread)
Fluid outlet fitting	1/4 NPSM external thread
Inlet screen	35 mesh (450 micron)
Wetted parts, pump &	stainless steel, brass, ultra-high molecular weight polyethylene (UHMWPE),
hose	carbide, nylon, aluminum, PVC, polypropylene, fluroelastomer
Wetted parts, gun	SG10: plated steel, nylon, aluminum, tungsten carbide, stainless steel, brass,
	fluroelastomer
Generator requirement	1500 Watt minimum
Electrical power	120VAC, 60 Hz, 1 phase, 15A
requirement
Storage temperature	-30° to 160°F (-35° to 71°C)
range ◆❖
Operating temperature	40° to 115°F (4° to 46°C)
range ✔

◆When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint

freezes in pump.

❖Damage to plastic parts may result if impact occurs in low temperature conditions.

✔Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.

312079A 35