Bosch Power Tools 18636-01 manual Inserting Bits, Chuck Sleeve Removing Chuck, Installing Chuck

Page 10

BM 2610944508 11-06 12/1/06 3:29 PM Page 10

INSERTING BITS

Move reverse switch lever to the center “OFF” position. Remove battery pack and rotate the clutch ring to the drill bit symbol

“ ”. Rotate the chuck sleeve counter- clockwise viewing from chuck end, and open chuck to approximate drill bit diameter. Insert a clean bit up to the drill bit flutes for small bits, or as far as it will go for large bits. Close chuck by rotating the chuck sleeve clockwise and securely tighten by hand (Fig. 4).

!WARNING Do not use the power of the drill while grasping

chuck to loosen or tighten bit. Friction burn or hand injury is possible if attempting to grasp the spinning chuck.

FIG. 4

CHUCK SLEEVE

REMOVING CHUCK

Rotate the clutch ring to the drill bit

symbol “ ”. Open the chuck all the way, remove left-hand thread screw inside chuck by turning it clockwise (Fig. 4).

Insert the short arm of a 1/2" hex key wrench and close jaws on flats of wrench (Fig. 5). Strike long arm of wrench sharply counterclockwise, remove wrench and unthread chuck from spindle.

INSTALLING CHUCK

Always keep the spindle threads, the threads of the chuck and securing screw free of

debris. To install a chuck, reverse “removing the chuck” procedure.

FIG. 5

FIG. 6

AUXILIARY HANDLE

The tool must be supported with the auxiliary handle, which can be swiveled 360˚. To reposition and/or swivel the handle, loosen the hand grip, move the handle to the desired position along the barrel and securely retighten the hand grip (Fig. 6).

BATTERY CHARGED CONDITION

INDICATOR

The battery is equipped with a charged condition indicator.

GREEN

INDICATOR LIGHTS

 

 

 

 

 

 

 

 

 

 

RED

BUTTON

INDICATOR LIGHT

 

 

By pressing the button ON, the charged condition can be checked when the battery is removed or when the machine is not in use. After approx. 5 seconds, the charged indicator switches off automatically.

•• • When all three lights are illuminated, this indicates the battery pack is between 67% and 100% charged.

•• When only two lights illuminate, this indicates the battery pack is between 33% and 66% charged.

•When only one light illuminates, this indicates the battery pack is less than 33% charged.

-10-

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Read Before Using Electrical safety General Safety RulesWork area safety Personal safetyService Power tool use and careBattery tool use and care Power tools are dangerous in the hands of untrained usersSafety Rules for Cordless Hammer Drills Prolonged useBattery Care Battery/ChargerNails, screws, keys, etc. Fire or injury may result Battery Disposal LITHIUM-ION BatteriesSymbols Cordless Hammer Drill Functional Description and SpecificationsAdjustable Ventilation Openings Gear ShifterOperating Instructions Green Indicator Lights RED Button Installing ChuckBattery Charged Condition Indicator Inserting BitsCharger INDICATORS, Symbols and Meaning Temperature Indicator LightInserting and Releasing Battery Pack Important Charging NotesCharging Battery Pack BC830 1 Hour Charger Battery Pack RED Light Charger Green LightOperating Tips Drilling Masonry Wire BrushesDrilling Metal Sanding and PolishingMaintenance CleaningAccessories Tool’sSécurité électrique Consignes générales de sécuritéSécurité du lieu de travail Sécurité personnelleUtilisation et entretien des outils à piles Utilisation et entretien des outils ÉlectroportatifsEntretien Vos vêtements, ce qui pourrait causer des blessures Le plomb provenant des peintures à base de plombChargeur de pile Entretien des pilesPiles LITHIUM-ION Mise au rebut des pilesNe tentez pas de Robert Bosch Tool Corporation participe volontairementSymboles Description fonctionnelle et spécifications Gâchette DE Commande Vitesse Variable Poignée AuxiliaireBLOC-PILES Temoin DE Temperature Perceuse à percussion sans cordonConsignes de fonctionnement Pose DU Mandrin Insertion DES ForetsDouille DU Mandrin Retrait DU Mandrin Poignee AuxiliaireInsertion ET Retrait DU BLOC-PILES Temoins DE CHARGE, Symboles ET SignificationTémoin DE Température Remarques Importantes Concernant LA ChargeChargement DU BLOC-PILES Chargeur DE 1 Heure BC830 BLOC-PILES Voyant Rouge Chargeur VertConsignes de fonctionnement Ponçage ET Polissage Perçage DES MétauxPerçage DE LA Maçonnerie Brosses MétalliquesEntretien NettoyageAccessoires Lame de tournevis Poignée auxiliaire ÉtuiSeguridad eléctrica Normas generales de seguridadSeguridad del área de trabajo Seguridad personalUso y cuidado de las herramientas Alimentadas por baterías MecánicasServicio de ajustes y reparaciones Normas de seguridad para taladros de percusión sin cordón Batería/cargador Cuidado de las bateríasEliminación de las baterías Tenga la amabilidad de llamar al 1-800-8-BATTERY paraBaterías DE Iones DE Litio Con aislamiento doble SímbolosDe Li-ion Descripción funcional y especificaciones Taladro de percusión sin cordónInstrucciones de funcionamiento Instalacion DEL Mandril Colocacion DE LAS BrocasManguito DEL Mandril Desmontaje DEL Mandril Indicador DE Estado DE Carga DE LA BateríaIndicadores Y Simbolos DEL Cargador Y SU Significado LUZ Indicadora DE LA TemperaturaIntroducción Y Suelta DEL Paquete DE Baterías Notas Importantes Para CargarCarga DEL Paquete DE Baterías Cargador DE 1 Hora BC830 Paquete DE Baterías LUZ Roja Cargador VerdeConsejos de funcionamiento Lijado Y Pulido Taladrado DE MetalTaladrado DE Mamposteria Escobillas DE AlambreServicio MantenimientoLimpieza = equipo estándar Accesorios= accesorios opcionales Remarques Notas Limited Warranty of Bosch Portable and Benchtop Power Tools

18636-03, 18636, 18636-01, 18636-02 specifications

Bosch Power Tools is synonymous with innovation and reliability, and their series of cordless drills, including models 18636-02, 18636-01, 18636, and 18636-03, exemplify these attributes. Designed for both professional tradespeople and DIY enthusiasts, these models are engineered to deliver exceptional performance in a variety of applications.

One of the main features of these Bosch drills is their powerful motor that provides an impressive torque output. This ensures that users can tackle a wide range of tasks, from drilling through tough materials to driving screws with precision. The models are equipped with a two-speed transmission, allowing users to switch between high torque for heavy-duty tasks and high speed for quick drilling, enhancing versatility.

The cordless design is another significant characteristic. Powered by advanced lithium-ion batteries, these models offer increased run time and reduced charging time. This technology ensures that tools remain lightweight while providing consistent power, enabling users to work without interruptions. Depending on the model, the battery capacity varies but consistently provides ample performance for extended tasks.

Ergonomics is a key consideration in the design of the 18636 series. The tools come with rubberized grips that enhance comfort and reduce user fatigue during prolonged use. The balanced design of these drills adds to their ease of handling, making them suitable for both professional applications and home improvement projects.

In terms of durability, Bosch has incorporated robust materials in the construction of these drills. They are designed to withstand the rigors of job site use, featuring shock-resistant housings that protect internal components from damage. Additionally, some models include advanced electronics that enable features like electronic brake and overload protection, further enhancing longevity.

User-friendly features are prevalent in this lineup, including LED work lights that illuminate dark work areas, and keyless chuck systems that allow for fast and easy bit changes. The models also frequently feature a built-in battery life indicator, enabling users to monitor power levels and avoid unexpected downtime.

In conclusion, the Bosch Power Tools 18636-02, 18636-01, 18636, and 18636-03 represent a commitment to quality, performance, and user convenience. With their powerful motors, efficient battery technology, ergonomic design, and durable construction, these drills are apt for a multitude of tasks, making them valuable assets in any toolbox. These tools demonstrate Bosch’s dedication to delivering cutting-edge solutions that meet the needs of today's demanding work environments.
Top Page Image Contents