OPERATION
STARTING AND STOPPING THE DUST COLLECTOR
The on/off buttons (A) and (B) Fig. 19 are located on the front of the motor housing. To turn the machine "ON", push the "ON" button (A).
To turn the machine "OFF", push the "OFF" button (B).
A 
B 
Fig. 19
LOCKING SWITCH IN THE “OFF” POSITION
IMPORTANT: When the machine is not in use, the “ON” button (A) Fig. 19 should be locked to prevent unauthorized use, using a padlock (C) Fig. 20 with a 3/16" diameter shackle through the hole beside the button.
C
Fig. 20
When using this dust collector, do not pick up anything that is burning, smoldering, or smoking, such as matches, cigarettes, or hot ashes.
Do not use this machine to vacuum combustible explosive materials, such as coal, grain, or other
Do not use this machine to vacuum hazardous, toxic, or carcinogenic materials, such as asbestos, pesticide, or
TROUBLESHOOTING
For assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or call the DELTA Machinery help line at
MAINTENANCE
KEEP MACHINE CLEAN
Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.
WEAR CERTIFIED SAFETY EQUIPMENT FOR EYE, HEARING AND RESPIRATORY PROTECTION WHILE USING COMPRESSED AIR.
FAILURE TO START
Should your machine fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet. Also, check for blown fuses or open circuit breakers in the line.
LUBRICATION & RUST PROTECTION
Apply household floor paste wax to the machine table, extension table or other work surface weekly. Or use a commercially available protective product designed for this purpose. Follow the manufacturer’s instructions for use and safety.
To clean cast iron tables of rust, you will need the following materials: a pushblock from a jointer, a sheet of medium
13