Black & Decker FSNS100 instruction manual Safety Guidelines / Definitions, General Safety Rules

Page 2

639224-00 FSNS100 Stapl 12/14/05 7:23 AM Page 2

SAFETY GUIDELINES / DEFINITIONS

WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. The symbols below are used to help you recognize this information.

indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage.

SAVE THESE INSTRUCTIONS

Read and understand all warnings and operating instructions before using any tool or equipment. When using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage. There are certain applications for which tools and equipment are designed. Black & Decker strongly recommends that this product NOT be modified and/or used for any application other than for which it was designed.

GENERAL SAFETY RULES

Read and understand tool labels and manual. Failure to follow warnings could result in DEATH or SERIOUS INJURY. (Fig. 1)

Operator and others in work area MUST wear safety glasses with side shields. These safety glasses must conform to ANSI Z87.1 requirements (approved glasses have “Z87” printed or stamped on them). (Fig. 2)

Keep fingers AWAY from trigger when not driving fasteners to avoid accidental firing. Never carry tool with finger on trigger. In "contact actuation mode", tool will fire a fastener if tool is bumped.

Choice of triggering method is important. Check manual for triggering options. See “Using the Tool“ section of this manual.

Fig. 1

Fig. 2

2

Image 2
Contents Narrow Crown Stapler VEA EL Español EN LA ContraportadaSafety Guidelines / Definitions General Safety RulesNever point tool at yourself or others in work Do not use tool without safety warning label. If Driving a nail into another nail may also cause a spark. Fig FSNS100 Stapl 12/14/05 724 AM Preparing the Tool Power SourceFunctional Description Using the Tool Operating InstructionsRubber Nose Cushion Clearing a Jammed FastenerMaintenance Clean and Inspect DailyService Information TroubleshootingAccessories Full TWO-YEAR Home USE WarrantySee ‘Tools-Electric’ Yellow Pages For Service & Sales Conservez CES Directives Lignes Directrices EN Matière DE Sécurité / DéfinitionsRègles Générales DE Sécurité Utilisez de l’air comprimé propre, sec FSNS100 Stapl 12/14/05 727 AM FSNS100 Stapl 12/14/05 727 AM FSNS100 Stapl 12/14/05 727 AM Préparation DE L’OUTIL Description FonctionnelleSource D’ALIMENTATION Directives D’UTILISATION Utilisation DE L’OUTILCoussin DE NEZ EN Caoutchouc Dégagement D’UNE Attache BloquéeEntretien Inspection ET Nettoyage QuotidiensSymptôme Problèmes Solutions DépannageGarantie Complète DE Deux ANS Pour Usage Résidentiel AccessoiresInformation SUR LES Réparations Conserve Estas Instrucciones Normas DE Seguridad DefinicionesNormas Generales DE Seguridad Regulado de 4,8 a 8,3 bar 70 a PSI. Fig FSNS100 Stapl 12/14/05 728 AM FSNS100 Stapl 12/14/05 728 AM FSNS100 Stapl 12/14/05 728 AM Preparación DE LA Herramienta Descripción DE LAS FuncionesFuente DE Energía Instrucciones DE Operación USO DE LA HerramientaProtector DE Goma DE LA Boca Remoción DE UN Elemento DE Fijación AtascadoMantenimiento Limpie E Inspeccione DiariamenteDetección DE Problemas Síntoma ProblemassolucionesGarantía Completa DE DOS Años Para USO EN EL Hogar AccesoriosInformación DE Servicio PUEBLA, PUE CULIACAN, SIN MONTERREY, N.LGUADALAJARA, JAL MEXICO, D.FFSNS100 Stapl 12/14/05 728 AM FSNS100 Stapl 12/14/05 728 AM FSNS100 Stapl 12/14/05 728 AM