Black & Decker FSNS100 instruction manual Do not use tool without safety warning label. If

639224-00 FSNS100 Stapl 12/14/05 7:24 AM Page 4

• Do not use tool without safety warning label. If
	Fig. 9
label is missing, damaged or unreadable, contact
1-800-544-6986for a replacement. (Fig. 9)

•Only use parts, fasteners and accessories approved by Black and Decker.

•Connect tool to air supply before loading fasteners, to prevent a fastener from being fired during connection. The tool driving mechanism may cycle when tool is connected to the air supply. (Fig. 10)

•Always assume the tool contains fasteners. No

horseplay. Respect the tool as a working	Fig. 11
implement. (Fig. 11)

• Operator and bystanders should wear hard hats	Fig. 12
to safeguard against possible injuries. (Fig. 12)

•Do not load fasteners with trigger or safety depressed, to prevent unintentional firing of a fastener. (Fig. 13)

•Remove finger from trigger when not driving fasteners. Never carry tool with finger on trigger. In “Contact Actuation Mode” tool will fire a fastener if safety is bumped while trigger is depressed.

(Fig. 14)

Fig. 10

Fig. 13

Fig. 14

4