Elation Professional Spot 250 manual Run

Design Spot 250™

5.Select "CEDT" by pressing the UP or DOWN buttons.

6.Press MODE/ESC, the display shows "OFF".

7.Press UP, the display will read "ON".

8.Press MODE/ESC, the display shows "SC02". You successfully downloaded the first scene.

9.Adjust the Step-time as described above.

10.Call up the second scene in your controller now.

11.Repeat steps 5-11 until all desired scenes are downloaded.

12.Press MODE/ESC to exit. The number of steps can be defined under “STEP” and the scenes can be called up under “RUN.”

RUN

- This function allows you to “RUN” the user-installed program. You can set the number of steps under Step (S-01- S-48). You can edit the individual scenes under Edit.

1.Access the main menu.

2.Tap the UP button until “EDIT” is displayed, press ENTER.

3.Tap the UP button until “RUN” is displayed, press ENTER.

4.“AUTO” is displayed. If you press the UP button it will show “SOUN”. Select which one you want to activate, and press ENTER.

5.Press UP, to select “ALON” or “NAST”. Which mean stand alone, and master/slave mode.

6.Select a mode, and press ENTER to confirm.

7.Press MODE/ESC to return to the main menu.

©Elation Professional® 39 Design Spot 250™