Elation Professional Spot 250 manual Yourself, doing so will void your manufactures warranty

Page 4

Design Spot 250™

yourself, doing so will void your manufactures warranty.

Please do not discard the shipping carton in the trash. Please recycle whenever possible.

WARRANTY REGISTRATION: The Design Spot 250™ carries a two year (730 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number must also be written down on a piece of paper and included in the shipping container. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Items returned without a R.A. number clearly marked on the outside of the package will be refused and returned at customer’s expense. You may obtain a R.A. number by contacting customer support at (323) 582-3322.

DISCHARGE LAMP WARNING: This fixture is fitted with a discharge lamp, which is highly susceptible to damage if improperly handled. Never touch the lamp with your bare hands, as the oil from your hands will shorten lamp life. Also, never move the fixture until the lamps have had ample time to cool. Remember, lamps are not covered under warranty conditions.

This fixture emits intense UV radiation, which is harmful to the eyes and skin. The intense luminance of the lamp can cause severe damage to the retina. Never operate this fixture with the protective covers removed, these covers have been specially designed to shield against UV radiation.

Epileptic Warning: Those suffering from epilepsy should avoid looking directly into the lamp at all times.

Avoid switching the fixture on and off repeatedly in short intervals, as this will reduce lamp life and intensity.

To achieve the intensity associated with discharge lamps, these lamps use a gas sealed in a high-pressure environment to emit a brilliant output. Due to the high pressure involved

©Elation Professional®

4

Design Spot 250™

Image 4
Contents Design Spot Contents General Information Support@elationlighting.comYourself, doing so will void your manufactures warranty Never open this fixture while in use Safety Instructions Design Spot Features General Guidelines Installing or replacing the lamp Lamp Installation InstructionsInstallation Procedure Lamp Optimization Design Spot Mounting and Installation MountingMounting points Clamp MountingSecuring the Design Spot Understanding DMX DMX-512 control connection DMX-512 connection with DMX terminatorFixture DMX addressing Design Spot Display LED Indicators Default settings shaded Fixture MenuLamp OFF Setting/Changing the DMX Address Main Menu FunctionsAddress Menu Test MenuAudi Play Menu RUNAuto Lamp Menu Rese Reset MenuALL Colr ScanGobo Shtr OthrTime Menu LifePlease Clear the lamp time every time you replace the lampRpan Menu Rtlt MenuFine Menu Degr MenuMIC Menu Display MenuLaau Controller Settings Fixture SettingsRdmx Reset function DlofDlay SpotReload the original factory settings DfseFeed FansVER AdjuEdit Menu RECStep SC01Design Spot RUN DMX Channel Traits Channel 1 PAN movement 8bit Channel Rotating gobos, cont. rotationChannel 8 Fixed Gobos Channel 7 Rotating Gobo Index, Rotating Gobo RotationChannel 9 3 facet rotating prism, Prism / Gobo macros Channel 10 Focus Channel 11 Shutter, Strobe ControlChannel 12 Dimmer Intensity Channel 13 IrisChannel 16 Lamp on/off, Reset, Internal Programs Error Codes Design Spot Design Spot Cleaning and Maintenance Disconnect from mains before starting maintenance operationYear Limited Warranty Design Spot Photometric Data Gobos Dimensional Drawings Circuit Schematic Technical Specifications Power supply Power consumptionElation Professional