Design Spot 250™
12. CLEANING AND MAINTENANCE
The following points have to be considered during the inspection:
1.Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during normal operation resulting in damage or injury as larger parts could fall.
2.There must not be any deformations on the housing, color lenses, rigging hardware and rigging points (ceiling, suspension, trussing). Deformations in the housing could allow for UV radiation leakage. Damaged rigging points or unsecured rigging could cause the unit to fall and serious injure a person.
3.All mechanical parts and motors should not show any traces of serious wear and should rotate freely.
4.Electric power supply cables must not show any damage, material fatigue or sediments. Never remove the ground prong from the power cable.
Further instructions depending on installation and usage have to be adhered by a skilled installer and any safety problems should be addressed before attempting operation.
Disconnect from mains before starting maintenance operation.
We recommend frequent cleaning of the device, this will ensure operational longevity and crisp light output. When cleaning, please use a moist,
There are no user serviceable parts inside this fixture with the exception of the lamp. Please refer all other service related issues to an authorized Elation service technician.
Should you decide to service the fixture yourself please order genuine Elation parts directly from Elation.
©Elation Professional® | 48 | Design Spot 250™ |