Elation Professional Spot 250 manual Play Menu RUN, Audi, Auto

Design Spot 250™

2.Tap the UP button until “TEST” is displayed, press ENTER.

3.The display will show T-01. You can now press the up button and test the different channels. For example: If you press the up button until “T-03” is displayed, the unit will test the color channel, changing the color one by one and show the rainbow effect with different speeds. Again please remember, there are 16 DMX channels, and all except channels 7, 11, and 15 can be tested

4.Press MODE/ENTER or EXIT to exit.

3.PLAY MENU -

RUN

– This feature is used to run the internal preset programs in either a Master/Slave or a stand-alone operating mode. Follow the procedure below to enter the run menu:

1.Access the main menu.

2.Tap the UP or DOWN button until “PLAY” is displayed, press ENTER.

3.Tap the UP or DOWN button until “RUN” is displayed, press ENTER.

4.Tap the UP or DOWN button to select either “Master” or “Alone” and press ENTER.

5.Press MODE/ESC to return to the main menu.

AUDI

- This feature is used to run the internal preset programs in AUDIO mode in either a Master/Slave or a stand-alone operating mode Follow the procedure below to enter the audio menu:

1.Access the main menu.

2.Tap the UP or DOWN button until “PLAY” is displayed, press ENTER.

3.Tap the UP or DOWN button until “AUDI” is displayed, press ENTER.

4.Tap the UP or DOWN button to select either “Master” or “Alone” and press ENTER.

5.Press MODE/ESC to return to the main menu.

AUTO

– Runs the unit without any DMX signal in stand-alone mode. Follow the procedure below to enter the auto menu:

1. Access the main menu.

©Elation Professional® 24 Design Spot 250™