GBC SC032, CC055 Important safety instructions, Electrical safeguards, On/Auto Forward, Reverse

GBC5151 SC032-CC055 Manual EU 19/12/05 11:34 Page 3

ShredMaster® SC032/CC055	￿
Important safety instructions	￿

YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT TO GBC. IN THIS INSTRUCTION MANUAL AND ON THE PRODUCT ARE IMPORTANT SAFETY MESSAGES. READ THESE MESSAGES CAREFULLY.

￿THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY MESSAGE IN THIS INSTRUCTION MANUAL AND ON THE PRODUCT. THIS SYMBOL INDICATES A POTENTIAL PERSONAL SAFETY HAZARD THAT COULD HURT YOU OR OTHERS, AS WELL AS CAUSE PRODUCT OR PROPERTY DAMAGE. DO NOT CONNECT HIS UNIT TO ELECTRICAL POWER OR ATTEMPT TO OPERATE IT BEFORE YOU HAVE READ THESE OPERATING INSTRUCTIONS. SAVE THESE INSTRUCTIONS FOR LATER USE.

THIS WARNING IS FOUND ON THE PRODUCT.

￿￿ElectricalATTENTIONshock hazard.

Do not open. No user servicable parts inside.

Refer servicing to qualified service personnel.

This safety message means that you could be seriously hurt or killed if you open the Product and expose yourself to hazardous voltage.

THIS WARNING IS FOUND ON THE CROSS-CUT VERSION ONLY.

￿WARNING

Sharp blades above. Keep hands away from discharge chute. Do not attempt to defeat safety interlock switch.

This safety message means that you could be seriously hurt if you place your hands in the discharge area.

The following ISO and IEC symbols appear on this product, and their meanings are as follows:

On/Auto

Forward

This means you should be careful because long hair can become entangled in the cutting head. This could hurt you

This means don't reach into the feed opening of the cutting head. This could hurt you

This means be careful of ties and other loose clothing which could become entangled in the cutting head. This could hurt you.

This means you should be careful of loose jewellery which could become entangled in the cutting head. This could hurt you.

Electrical safeguards ￿

•Unplug your shredder before moving it, emptying the shred bag, or when it is not in use for an extended period of time.

•Do not operate with a damaged power supply cord or plug, after it malfunctions, or after it has been damaged in any manner.

•Do not overload electrical outlets beyond capacity as this can result in fire or electrical shock.

•The socket-outlet should be installed near the equipment and shall be easily accessible.

•Do not alter the attachment plug. The plug is configured for the appropriate electrical supply.

•Do not use near water.

•Keep out of reach of children.

•Do NOT use aerosol dusters or cleaners.

•Do NOT spray anything into the shredder.

￿WARNING

Do NOT use aerosol dusters or cleaners

Do NOT spray anything into the shredder

Foreign substances can be explosive

Reverse