Peavey CEL-2A manual

	CEL-2A
	SPECIFICATIONS
Control		Adjustment Range
Expander Threshold		-80 dBu to +10 dBu
Expander Ratio		1:1 (off ) to 1:5 (gate)
Expander Attack		.5 mSec (fixed)
Expander Release		200 mSec (fixed)
Compressor Threshold		-40 dBu to +20 dBu
Compressor Ratio		1:1 (off ) to infinite:1 (limit)
Compressor Attack		.5 mSec to 100 mSec
Compressor Release		.05 sec to 2 sec
Limiter Threshold		0 dBu to +20 dBu (off )
Limiter Attack		.5 mSec (fixed)
Limiter Release		50 mSec (fixed)
Gain Recovery		0 dB to +20 dB
Input	Impedance	Connector
XLR (balanced)	20K oHms	XLR
		Pin 1 = ground
		Pin 2 = positive phase
		Pin 3 = negative phase
TRS (balanced)	20K oHms	1⁄4"
		Sleeve = ground
		Tip = positive phase
		Ring = negative phase
1⁄4" In/Out Phone (unbalanced)	10K oHms	1⁄4" phone
		tip = input
		ring = output
		(see control functions above)

THD: Less than 0.1%‚ 20 Hz–20 kHz (10 Hz–80 kHz BW)

Signal-to-noise: 97 dB (0 dBu reference level)

Frequency Response: 20 Hz–64 kHz (+0 dB/-1 dB)

Output Impedance: 100 oHms (XLR and 1⁄4")

Meters: Two 12-segment LED arrays‚ two 10-segment LED arrays‚ two activity LEDs

Dimensions: 19" W x 9.25" D x 1.75" H

Weight: 7.2 lbs (3.3 kg)

Power Requirements: Domestic: 100–120 VAC 50/60 Hz (15 watts nominal); Export: 230 VAC 50/60 Hz (15 watts nominal)

30