Epson DW734 instruction manual Troubleshooting Guide, DAY Money Back Guarantee

Page 9

90 DAY MONEY BACK GUARANTEE

If you are not completely satisfied with the performance of your DEWALT Power Tool, Laser, or Nailer for any reason, you can return it within 90 days from the date of purchase with a receipt for a full refund – no questions asked.

FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-4-DEWALT for a free replacement.

TROUBLESHOOTING GUIDE

IF THE MATERIAL DOES NOT FEED PROPERLY, CHECK FOR:

•excess clogging in the dust hood.

•excess oil/debris/pitch on feed rollers.

•excessively twisted, cupped or bowed material.

•a broken drive belt.

•dull knives.

IF THE CIRCUIT BREAKER TRIPS REPEATEDLY:

•check the sharpness of the knives.

NOTE: Circuit breaker overload is often the result of dull knives. If the circuit breaker on your planer trips, check the sharpness of your knives before attempting to reset the breaker in order to continue planing.

•reduce the depth of cut.

IF THE UNIT DOES NOT RUN, CHECK TO SEE:

•if the unit is plugged in.

•if the tool tray is properly in place.

•if the circuit breaker needs to be reset.

English

7

Image 9

Contents Dewalt Page General Safety Instructions Important Safety Instructions for All ToolsAdditional Specific Safety Rules for Planers Minimum Gage for Cord SetsOperation AssemblyTable Extensions Depth AdjustmentCarriage Head Lock Material Removal GaugeProper Planing Technique Planing BasicsTwisted, Cupped and Bowed Wood SnipeInstalling a new belt MaintenanceCalibrating the Depth Adjustment Scale Changing the Planer KnivesCleaning and Lubrication Circuit Breaker Reset Button FigAccessories Three Year Limited WarrantyDAY Money Back Guarantee Troubleshooting GuideIf the Material does not Feed PROPERLY, Check for If the Circuit Breaker Trips RepeatedlyImportant consignes de sécurité concernant Tous les outils Conserver CES DirectivesRègles générales de sécurité Règles de sécurité supplémentaires concernant la raboteuseRaccordement électrique Caractéristiques techniquesDéballage de la raboteuse Transport de la raboteuseFonctionnement AssemblageTechnique à privilégier Techniques DE Rabotage DE BaseButée de tourelle DépressionsRemplacement DES Lames Remplacement DES LamesRabotage DE Pièces Tordues Figure Rabotage DE Pièces Concaves FigureEntretien Installation d’une nouvelle courroieÉtalonnage de l’échelle de réglage de la profondeur Mise à niveau des rallonges de plateauGuide DE Dépannage Guarde Estas Instrucciones Normas generales de seguridadLongitud total del cordón en metros Conexión eléctrica EspecificacionesDesempaque su cepillo Transporte del cepilloOperación EnsamblajeTope tipo torreta Indicador de recorte de materialElementos Básicos DEL Cepillado Técnica de cepillado correctaPara Cepillar Madera Arqueada a LO Ancho FIG Cómo Cambiar LAS Cuchillas DEL CepilloSi no puede aserrar el material Para Cepillar Madera Arqueada a LO Largo FIGCómo instalar una nueva correa MantenimientoCómo calibrar la escala de ajuste de profundidad Cómo nivelar las extensiones de la mesaEscobillas Botón de reposición del cortacircuitos FigLimpieza y lubricación AccesoriosInformación Técnica DW734 Guía DE Resolución DE Problemas