9.Press TIME FWD or TIME
BACK to set the time on the display
as selected in your HEATING or COOLING SCHEDULE. Be sure to check the AM or PM on the display.
10.Press the red 
or blue 
key to adjust the temperature to match your schedule. If you want the fan ON continuously during this
period, press | FAN . |
11.Press PROGRAM VIEW one time. MOR on the display will change to DAY. Repeat steps 9 and
10to enter time and temperature for this period.
12.Press PROGRAM VIEW to continue through the entire schedule, entering time and temperature for each period. When
you are satisfied that your program matches your schedule, press PROGRAM RUN . Programming is now complete for this mode and your program is running.
13.To program the other mode, repeat the procedure from step 6.
27
Programming