Grizzly G1021 instruction manual Safety Instructions For Power Tools

Page 5

SECTION 1: SAFETY

WARNING

For Your Own Safety Read Instruction Manual Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible dangers. This manual uses a series of symbols which are intended to convey the level of criticality of the safety message. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.

NOTE

This symbol is used to alert the user to useful information about

safe and proper operation of the equipment.

CAUTION

WARNING

DANGER

Failure to obey a CAUTION symbol and notation may result in minor or moderate property damage or personal injury.

Failure to obey a WARNING symbol and notation can result in serious injury to yourself and others.

Failure to obey a DANGER symbol and notation WILL result in serious personal injury including loss of life or body parts.

WARNING

Safety Instructions For Power Tools

1.KEEP GUARDS IN PLACE and in working order.

2.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning on.

3.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

4.DON’T USE IN DANGEROUS ENVIRON- MENT. Don’t use power tools in damp or wet locations, or where any flammable or noxious fumes may exist. Keep work area well lighted.

5.KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe distance from work area.

6.MAKE WORK SHOP CHILD PROOF with padlocks, master switches, or by removing starter keys.

7.DON’T FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

8.USE RIGHT TOOL. Don’t force tool or attachment to do a job for which it was not designed.

G1021 15" Planer

-5-

Image 5
Contents Planer Page Table Of Contents Adjustment Block Pattern Warranty and Returns Safety Instructions For Power Tools SafetySafety Instructions For Power Tools Additional Safety Instructions For Planers Circuit Requirements Fusing220V Operation Grounding Extension CordsCommentary IntroductionParts Inventory UnpackingSite Considerations Clean UpOptional Stand AssemblyOverview To Mount the Planer Starter SwitchPlaner Unit To Mount the Handwheel Handwheel Knife Setting JigTo Assemble the Knife Setting JIG To Attach the Dust Port Extension Rollers Dust PortTo Attach the Extension Rollers Overview of planer adjustment controls G1021 15 Planer AdjustmentsTo Check Table Parallelism Table AdjustmentGauge Block To Inspect the Knives Knife InspectionTo SET the Knives Knife SettingChip Breaker To Adjust the ChipbreakerTo Check Roller Height Feed Roller HeightFeed Roller Pressure To Adjust Roller HeightTo Adjust Roller Pressure Bed Rollers To Adjust the BED RollersChip Deflector To Adjust the Chip DeflectorAnti-KickbackBelts To INSPECT/ADJUST the PulleysTo Inspect the Gearbox GearboxTo Check Belt Tension Extension Rollers Extension RollersThickness Scale To Adjust the ScaleTable Locks OperationsDepth Limiter Power FeedHandwheel Type Shear PSI Test Run Wood SpeciesPlaning Difficulties GeneralKnives MaintenanceFill Drain LubricationAdjustment Section Closure Symptom Possible Cause Corrective Action TroubleshootingReference 145 79 80 146 See page 41-42 for Reference Number Listing See page 41-42 for Reference Number Listing Pulley Cover PK06M G1021 15 Planer Warranty and Returns