DeWalt D25013 instruction manual Components Fig, Assembly and Adjustments, Side Handle Fig

Page 7

COMPONENTS (Fig. 1)

WARNING: Never modify the power tool or any part of it. Damage

or personal injury could result.

 

A. Variable speed

F. Mode selector button

trigger switch

G. Mode selector

B. Main handle

H. Reversing lever

C. Side handle

I. Lock-on button

D. Depth rod

J. Depth rod release button

E. SDS Plus® chuck

 

INTENDED USE

This heavy-duty rotary hammer has been designed for professional drilling and hammerdrilling, screwdriving and light chipping at various work sites (i.e., construction sites). DO NOT use under wet conditions or in presence of flammable liquids or gases.

This heavy-duty rotary hammer is a professional power tool. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool.

ASSEMBLY AND ADJUSTMENTS

English

FIG. 1

E

 

D

F GH

B

A

WARNING: To reduce the risk of injury, turn unit off and disconnect machine from power source before installing and removing accessories, before adjusting or changing set-ups or when making repairs. Be sure the trigger switch is in the OFF position. An accidental start-up can cause injury.

Side Handle (Fig. 1)

WARNING: To reduce the risk of personal injury, ALWAYS operate the tool with the side handle properly installed and securely

C I

J

C

tightened. Failure to do so may result in the side handle slipping during tool operation and subsequent loss of control. Hold tool with both hands to maximize control.

A side handle comes assembled with this rotary hammer. The side handle (C) can be fitted to suit both right-hand and left-hand users.

TO ADJUST THE SIDE HANDLE

1.Loosen the side handle (C) by turning it counterclockwise.

2.Rotate the side handle to the desired position.

3.Tighten the side handle by turning it clockwise.

TO CHANGE SIDES

For right-hand users: slide the side handle clamp over the chuck, handle at the left.

For left-hand users: slide the side handle clamp over the chuck, handle at the right.

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Page Page Electrical Safety Definitions Safety GuidelinesGeneral Power Tool Safety Warnings Work Area SafetyPower Tool USE and Care Additional Safety Instructions for Rotary HammersService Voltage Volts Total length of cord in meters m Motor Components Fig Assembly and AdjustmentsSide Handle Fig Variable Speed Trigger Switch FigMode Selector Fig Reversing Lever FigOperation SDS-plusChuck FigProper Hand Position Fig Drilling Tools Overload ClutchDrilling Fig Depth Rod Fig MaintenanceCleaning Chipping and ChisellingLubrication AccessoriesRepairs Seguridad DEL Área DE Trabajo Definiciones Normas De seguridadSeguridad Eléctrica USO Y Mantenimiento DE LA Herramienta Eléctrica Seguridad PersonalMantenimiento Ténsion Volts Longitud del cable en metros m Descripción FIG Mango lateral Fig Montaje Y AjustesInterruptor de gatillo Fig Botón DE Bloqueo EN Encendido Sólo CON D25013 Palanca de reversa FigSelector de modo Fig Velocidad VariableFuncionamiento Broquero/mandril SDS Plus FigBien colocar las manos Fig Funcionamiento DE Taladrado Embrague de sobrecargaTaladros Fig TaladradoVarilla de profundidad Fig CinceladoAccesorios MantenimientoLimpieza LubricaciónRegras Gerais de Segurança Definições Diretrizes de SegurançaGuarde Estas Instruções USO E Cuidados DA Ferramenta Reparos Instruções de segurança adicionais para marteletes rotativosTensão Comprimento do cabo de extensão Componentes Fig Empunhadura lateral Fig Montagem E AjustesInterruptor tipo gatilho Fig Velocidade Variável Alavanca de reversão FigBotão DE Trava Como segurar corretamente a ferramenta Fig Seletor de modo FigMandril SDS-plusFig Como Operar a FerramentaOperação DE Perfuração Limitador de torqueFerramentas de perfuração Perfuração FigBarra de profundidade Fig RompedorAcessórios ManutençãoLimpeza LubrificaçãoCapacidade Ótima ReparosEspecificações D25013
Top Page Image Contents