DeWalt D25013 Trigger Switch Fig, Reversing Lever Fig, Mode Selector Fig, Variable Speed

Page 8

English

Trigger Switch (Fig. 1)

To start the rotary hammer, depress the trigger switch (A). To stop rotary hammer, release the switch.

NOTE: Use lower speeds for starting holes without a centerpunch, drilling in metal, plastics or ceramics, or driving screws. Higher speeds are better for drilling in masonry for maximum efficiency.

VARIABLE SPEED

The variable speed trigger switch (A) permits speed control. The farther the trigger switch is depressed, the higher the speed of the drill.

LOCK-ON BUTTON

WARNING: Be sure to release the locking mechanism before disconnecting the plug from the power supply. Failure to do so will cause the hammerdrill to start immediately the next time it is plugged in. Damage or personal injury could result.

The lock-on button (I) is for use only when the rotary hammer is stationary, mounted in a drill press stand or for chipping applications.

Before using the tool each time, be sure that the lock-on button release mechanism is working freely.

For continuous operation, press and hold the trigger switch (A); press the lock-on button (I); release the trigger switch and then release the lock-on button. The tool will continue to run.

To stop the tool in continuous operation, quickly press and release the trigger switch.

Reversing Lever (Fig. 1)

The reversing lever (H) is used to reverse the rotary hammer for backing out fasteners or jammed bits in drill-only mode.

CAUTION: When reversing to clear jammed bits, be ready for strong reactive torque.

To reverse the rotary hammer, turn it off and align the reversing lever (H) with the yellow arrow pointing backward (viewed when holding drill in operating position).

To position the lever for forward operation, turn the rotary hammer off and align the reversing lever (H) with the yellow arrow pointing forward (viewed when holding drill in operating position).

Mode Selector (Fig. 2)

NOTICE: Tool must come to a complete stop before activating the mode selector button or damage to the tool may result.

FIG. 2

HAMMER/DRILL MODE

G

F

DRILL-ONLY MODE

F

G

HAMMER-ONLY MODE

F G

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Page Page Definitions Safety Guidelines General Power Tool Safety WarningsWork Area Safety Electrical SafetyService Additional Safety Instructions for Rotary HammersPower Tool USE and Care Voltage Volts Total length of cord in meters m Motor Side Handle Fig Assembly and AdjustmentsComponents Fig Trigger Switch Fig Mode Selector FigReversing Lever Fig Variable SpeedProper Hand Position Fig SDS-plusChuck FigOperation Drilling Fig Overload ClutchDrilling Tools Maintenance CleaningChipping and Chiselling Depth Rod FigRepairs AccessoriesLubrication Seguridad Eléctrica Definiciones Normas De seguridadSeguridad DEL Área DE Trabajo Seguridad Personal USO Y Mantenimiento DE LA Herramienta EléctricaMantenimiento Ténsion Volts Longitud del cable en metros m Descripción FIG Interruptor de gatillo Fig Montaje Y AjustesMango lateral Fig Palanca de reversa Fig Selector de modo FigVelocidad Variable Botón DE Bloqueo EN Encendido Sólo CON D25013Bien colocar las manos Fig Broquero/mandril SDS Plus FigFuncionamiento Embrague de sobrecarga Taladros FigTaladrado Funcionamiento DE TaladradoCincelado Varilla de profundidad FigMantenimiento LimpiezaLubricación AccesoriosGuarde Estas Instruções Definições Diretrizes de SegurançaRegras Gerais de Segurança USO E Cuidados DA Ferramenta Instruções de segurança adicionais para marteletes rotativos ReparosTensão Comprimento do cabo de extensão Componentes Fig Interruptor tipo gatilho Fig Montagem E AjustesEmpunhadura lateral Fig Botão DE Trava Alavanca de reversão FigVelocidade Variável Seletor de modo Fig Mandril SDS-plusFigComo Operar a Ferramenta Como segurar corretamente a ferramenta FigLimitador de torque Ferramentas de perfuraçãoPerfuração Fig Operação DE PerfuraçãoRompedor Barra de profundidade FigManutenção LimpezaLubrificação AcessóriosEspecificações ReparosCapacidade Ótima D25013
Top Page Image Contents