Cisco Systems RV042RF manual Linksys QuickVPN Client Installation and Configuration

Page 66

Appendix B

Linksys QuickVPN for Windows 2000, XP, or Vista

3.In the Router’s web-based utility, click the VPN tab.

4.Click the VPN Client Access tab.

5.Click Generate to generate a new certificate (if needed).

VPN Client Access Screen

6.To export a client certificate, click Export for Client and save the certificate as a .pem file.

7.Distribute the certificate to all QuickVPN users.

Add VPN Client Users

For each QuickVPN client, repeat steps 1-6.

VPN Client Access Screen

1.On the VPN Client Access screen, enter the user name in the User Name field.

2.Enter the password in the New Password field, and enter it again in the Confirm New Password field.

3.For the Change Password Allowed setting, select Yes to allow the user to change his or her password. Otherwise, keep the default, No.

4.To activate the new user, select Active.

5.Click Add to list.

6.Click Save Settings.

NOTE: If the Router’s LAN IP address is the default, 192.168.1.1, then a pop-up window will appear when you first save these settings. You will be asked if you want the Router to automatically change its LAN IP address to prevent conflicting IP addresses. To allow the Router to change its LAN IP address, click Yes.

If there is an IP address conflict, the QuickVPN client will not be able to connect to the Router.

Linksys QuickVPN Client Installation and Configuration

For each QuickVPN client, do the following:

1.Install Linksys QuickVPN. (Use the appropriate installation procedure, “Install from the CD” or “Download from the Internet”.)

2.Install the client certificate.

Install from the CD-ROM

1.Insert the RV042 CD-ROM into your CD-ROM drive. Click Start and then click Run. In the field provided, enter D:\VPN_Client.exe (if “D” is the letter of your CD-ROM drive).

2.The License Agreement screen appears. Read the agreement. Click Yes to accept the terms and conditions, and then the appropriate files are copied to the computer. Clicking the Back or No button will close the window, and the software will not be installed on the computer.

License Agreement

10/100 4-Port VPN Router

59

Image 66
Contents 10/100 4-Port VPN Router Icon Descriptions About This GuideAbout This Guide Online ResourcesTable of Contents Ddns Appendix a Troubleshooting Appendix B Linksys QuickVPN for Windows 2000, XP, or VistaAppendix G Trend Micro ProtectLink Gateway Service Appendix F Firmware UpgradeAppendix H Specifications Appendix D IPSec NAT TraversalAppendix I Warranty Information Appendix K Regulatory InformationAppendix L Contact Information Chapter Chapter IntroductionIntroduction Computer using VPN client software to VPN Router Chapter Product Overview Product OverviewPhysical Installation Chapter InstallationInstallation Cable ConnectionsInstallation How to Access the Web-Based Utility Chapter Advanced ConfigurationAdvanced Configuration OverviewPort Statistics ConfigurationSystem Information Trend Micro ProtectLink GatewayVPN Setting Status Network Setting StatusFirewall Setting Status Log Setting StatusSetup Tab Network LAN SettingNetwork Dual-WAN/DMZ Setting WAN Connection TypePPPoE Point-to-Point Protocol over Ethernet Pptp Point-to-Point Tunneling ProtocolSetup Password Heart Beat SignalPassword Setup TimeSetup DMZ Host TimePort Range Forwarding Setup Tab ForwardingForwarding Port TriggeringSetup UPnP UPnPOne-to-One NAT Setup One-to-One NATSetup MAC Clone Add RangeWAN1/2 Setup DdnsMAC Clone DynDNS.orgDynamic Routing Setup Advanced RoutingAdvanced Routing Oray.net PeanutHull DdnsDhcp Setup Static RoutingSetup Dynamic IPStatic IP Status Smart Link BackupDhcp Status Dual-WANNetwork Service Detection Load BalanceSystem Management Bandwidth Management Bandwidth WAN1/2Protocol Binding Bandwidth Management Type Bandwidth ManagementMaximum Bandwidth provided by ISP Rate ControlSystem Management Snmp PriorityDNS Name Lookup System Management DiagnosticDiagnostic PingSystem Management Restart Factory DefaultFirmware Upgrade Firmware DownloadExport Configuration File Port Management Port SetupImport Configuration File Basic Per Port ConfigPort Status Port Management Port StatusFirewall General GeneralFirewall Access Rules Restrict WEB FeaturesAccess Rules Add a New Access RuleServices Firewall Content Filter SchedulingVPN Summary Content FilterProtectLink SummaryGroupVPN Status Gateway to GatewayClient to Gateway Add a New Tunnel Local Group SetupVPN Gateway to Gateway VPN Clients StatusLocal Security Group Type Remote Group Setup Remote Security Gateway TypeIPSec Setup IKE with Preshared KeyRemote Security Group Type Keying Mode Manual VPN Client to Gateway AdvancedTunnel Tunnel No The tunnel number is automatically generatedRemote Client Setup Remote ClientGroup VPN Default is Domain NameFQDN Keying Mode Manual Tunnel Only VPN VPN Client Access VPN Client Users VPN Client AccessVPN VPN Pass Through Certificate ManagementVPN Pass Through VPN Pptp ServerLog System Log Pptp ServerSyslog Log SettingSystem Log MailLog System Statistics Basic Setup WizardObtain an IP automatically PPPoE MinutesAccess Rule Setup Select the Log Rule Manual SupportLogout Linksys Web SiteAppendix a Troubleshooting TroubleshootingAppendix a Linksys QuickVPN for Appendix BAppendix B Windows 2000, XP, or VistaClick the VPN Client Access tab Linksys QuickVPN Client Installation and ConfigurationInstall from the CD-ROM Click Add to list Click Save SettingsDownload from the Internet Install the Client CertificateClick Business Click Router/VPN Solutions Linksys QuickVPN ConnectionConfirm New Password Re-enter your new password Version Number of Linksys QuickVPNAppendix C Gateway-to-Gateway VPN Tunnel Configuration of the RVL200Appendix C Before You BeginConfiguration of the RV042 Configuration of PC 1 and PCRV042 RVL200 Dynamic IP B.B.B.B with Configuration when Both Gateways Use Dynamic IP Addresses Appendix C Appendix D Configuration of ScenarioConfiguration of Router a Appendix D IPSec NAT TraversalConfiguration of Router B IPSec NAT TraversalOne-to-One NAT Rule on NAT 2 RV042 One-to-One NAT Rule on NAT 1 RV042Click the One-to-One NAT tab Configuration of Router a Appendix D Appendix E Bandwidth Management Creation of New ServicesAppendix E Bandwidth ManagementCreation of New Bandwidth Management Rules Upgrade the Firmware Appendix F Firmware UpgradeFirmware Upgrade Alternative Firmware Upgrade OptionFirmware Upgrade Appendix G Appendix G Trend Micro ProtectLink Gateway ServiceHow to Purchase, Register, or Activate the Service System SummaryHow to Use the Service ProtectLinkProtectLink Web Protection Web ProtectionEmail Protection ProtectLink Email ProtectionProtectLink License LicenseAppendix G Appendix H Specifications SpecificationsAppendix H Appendix Warranty InformationObtaining Warranty Service Exclusions and LimitationsWarranty Information Technical SupportSoftware in Linksys Products Appendix JAppendix J Software License Agreement Software LicensesSchedule Software License AgreementPreamble Appendix J END of Terms and Conditions OpenSSL License Original SSLeay LicenseAppendix J Appendix K Regulatory InformationDansk Danish Miljøinformation for kunder i EU Appendix K Norsk Norwegian Miljøinformasjon for kunder i EU Appendix K Appendix L Contact Information