Chapter 4 | Advanced Configuration |
Firewall > Access Rules
Access Rules
Except for the default rules, all configured access rules are listed in the Access Rules table, and you can set the priority for each custom rule.
If the Access Rules table has multiple pages, select a different page to view from the Jump to
adifferent number from the entries per page
For each access rule, the Access Rules table lists the following:
Priority The priority of the access rule is displayed, 1 indicating the highest priority. To change its priority, select
adifferent priority from the
Policy Name The name of the access rule is displayed.
Enable The status of the access rule is displayed. To enable or disable a rule, click the Enable check box.
Action The Action, Allow or Deny, is displayed. Service The Service is displayed.
Source Interface The Source Interface, LAN or WAN1/2, is displayed.
Source The specific Source is displayed. Destination The specific Destination is displayed.
Time The time interval to which the access rule applies is displayed.
Day The days to which the access rule applies is displayed.
Click Edit to edit an access rule, or click the Trash Can icon to delete an access rule.
Click Add New Rule to add new access rules, and the Add a New Access Rule screen appears.
Click the Restore to Default Rules to restore the default rules and delete the custom access rules.
Add a New Access Rule
Add a New Access Rule
Services
Wizard If you need help to configure the access rules, click Wizard, and follow the
Enter Policy Name Enter a name for the new access rule.
Action Select Allow or Deny, depending on the purpose of the access rule.
Service Select the Service you want.
If the Service you need is not listed in the menu, click Service Management to add the new service. The Service Management screen appears.
10/100 | 31 |