Cisco Systems RV042RF manual Creation of New Bandwidth Management Rules, Click Save Settings

Appendix E Bandwidth Management

Creation of New Bandwidth Management Rules

Create four new rules: Vonage VoIP (Upstream), Vonage VoIP (Downstream), Vonage 2 (Upstream), and Vonage 2 (Downstream).

1.On the Bandwidth Management screen, select Vonage VoIP from the Service drop-down menu.

2.Enter the IP address or range you need to control. To include all internal IP addresses, keep the default, 0.

3.From the Direction drop-down menu, select Upstream for outbound traffic.

4.In the Min. Rate field, enter the minimum rate for the guaranteed bandwidth. For example, you can set a minimum rate of 40 kbit/sec.

5.In the Max. Rate field, enter the maximum rate for the maximum bandwidth. For example, you can set a maximum rate of 80 kbit/sec.

6.Select Enable to enable this rule.

7.After you have set up the rule, click Add to list.

Create Vonage VoIP Rule

8.Set up a second rule for Vonage VoIP, this time for the Downstream direction.

Select Vonage VoIP from the Service drop-down menu.

9.Enter the IP address or range you need to control. To include all internal IP addresses, keep the default, 0.

10.From the Direction drop-down menu, select Downstream for inbound traffic.

11.In the Min. Rate field, enter the minimum rate for the guaranteed bandwidth. For example, you can set a minimum rate of 40 kbit/sec.

12.In the Max. Rate field, enter the maximum rate for the maximum bandwidth. For example, you can set a maximum rate of 80 kbit/sec.

13.Select Enable to enable this rule.

14.After you have set up the rule, click Add to list.

15.Set up a rule for Vonage 2. Select Vonage 2 from the Service drop-down menu.

16.Enter the IP address or range you need to control. To include all internal IP addresses, keep the default, 0.

17.From the Direction drop-down menu, select Upstream for outbound traffic.

18.In the Min. Rate field, enter the minimum rate for the guaranteed bandwidth. For example, you can set a minimum rate of 40 kbit/sec.

19.In the Max. Rate field, enter the maximum rate for the maximum bandwidth. For example, you can set a maximum rate of 80 kbit/sec.

20.Select Enable to enable this rule.

21.After you have set up the rule, click Add to list.

22.Set up a second rule for Vonage 2 (Downstream). Select Vonage 2 from the Service drop-down menu.

23.Enter the IP address or range you need to control. To include all internal IP addresses, keep the default, 0.

24.From the Direction drop-down menu, select Downstream for inbound traffic.

25.In the Min. Rate field, enter the minimum rate for the guaranteed bandwidth. For example, you can set a minimum rate of 40 kbit/sec.

26.In the Max. Rate field, enter the maximum rate for the maximum bandwidth. For example, you can set a maximum rate of 80 kbit/sec.

27.Select Enable to enable this rule.

28.After you have set up the rule, click Add to list.

Create Vonage 2 Rule

29.Click Save Settings.

4-Port SSL/IPSec VPN Router 73