Black & Decker BPRR1200 manual Router bits fig. O, Maintenance, Accessories, Technical data

ENGLISH

•Use HSS router bits for softwood.

•Use TCT router bits for hardwood.

•You can use the tool without a guide (fig. N). This is useful for signwriting and creative work. Only make shallow cuts.

•Refer to the table below for common types of router bits.

Router bits (fig. O)

Description	Application
Straight bit (1)	Grooves and rebates
Trimming bit (2)	Trimming laminates or hardwood;
	accurate profiling using a template
Rebating bit (3)	Rebates on straight or curved
	workpieces
V-grooving bit (4)	Grooves, engraving and edge
	bevelling
Core box bit (5)	Fluting, engraving and decorative
	edge moulding
Cove bit (6)	Decorative edge moulding
Ogee moulding bit (7)	Decorative edge moulding
Rounding over bit (9)	Rounding over edges
Dovetail bit (10)	Dovetail joints
Chamfer bit (11)	Chamfer edges

Maintenance

Your tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

Warning! Before performing any maintenance, switch off and unplug the tool.

•Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.

•Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.

Accessories

The performance of your tool depends on the accessory used. Black & Decker accessories are engineered to high quality standards and designed to enhance the performance of your tool. By using these accessories you will get the very best from your too

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be fitted:

•Safely dispose of the old plug.

•Connect the brown lead to the live terminal in the new plug.

•Connect the blue lead to the neutral terminal.

•Connect the green/yellow lead to the earth terminal.

Warning! Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 13 A.

Technical data

		BPRR1200
Input voltage	VAC	220-240
Power input	W	1,200
No-load speed	/min	8,000 - 27,000
Collet size		5/16" (8 mm) /
		1/4" (6.35 mm) / 6 mm
Max. diameter of router bit	mm	30
Max. depth of cut	mm	55
Weight	kg	3.6

12