Chapter 4 System Startup and Basic System Configuration
Powering On the Router and Observing the Boot Process
Table
LED Display1 | Meaning | Source |
ROMI | The ROM image is being loaded into line card memory. | RP Cisco IOS |
GET |
| software |
|
|
|
FABL | The line card is waiting for the fabric downloader to load.3 | RP Cisco IOS |
WAIT |
| software |
|
|
|
FABL | The fabric downloader is being loaded into line card memory. | RP Cisco IOS |
DNLD |
| software |
|
|
|
FABL | The fabric downloader is being launched. | RP Cisco IOS |
STRT |
| software |
|
|
|
FABL | The fabric downloader is launched and running. | RP Cisco IOS |
RUN |
| software |
|
|
|
IOS | Cisco IOS software is being downloaded into line card memory. | RP Cisco IOS |
DNLD |
| software |
|
|
|
IOS | Cisco IOS software is being launched. | RP Cisco IOS |
STRT |
| software |
|
|
|
IOS | Cisco IOS software is running. | RP Cisco IOS |
UP |
| software |
|
|
|
IOS | The line card is enabled and ready for use. | RP Cisco IOS |
RUN |
| software |
|
|
|
1.Some LED sequences may occur too quickly to view. Sequence are shown in this tabular form as a baseline to represent line card functionality at startup.
2.The version of MBus microcode running on your system might be different.
3.The fabric downloader loads the Cisco IOS software image onto the line card.
|
| Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide |
|
|
|
|
| ||
|
|
| ||
|
|
|