Beginning Assembly
This section will cover the minimum assembly and adjustment instructions needed to begin operation. For best results, complete the assem- bly in the order provided in this manual and then read the remaining portion of the manual before attempting any type of operations.
Safety must come first! Read and follow these instructions before beginning assembly:
Wear safety glasses dur- ing the entire assembly process. Failure to com- ply may result in serious personal injury.
Disconnect power to the machine when perform- ing all assembly steps. Failure to do this may result in serious person- al injury.
Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.
Most of your Edge Sander has been assembled at the factory, but some parts must be assembled or installed after delivery.
Installing Feet
To install the feet on the sander:
1.Thread the feet into the bottom of the stand as shown in Figure 5.
Stand Foot
Figure 5. Stand foot threaded onto stand.
| G0512 Edge Sander | |
|