Hitachi SP 18SA Wool Bonnet Assembly and Disassembly, Assembling Fig, Disassembling

Page 12

English

WOOL BONNET ASSEMBLY AND DISASSEMBLY

WARNING: Never attempt to assemble or disassemble the wool bonnet while the polisher is capable of being turned “ON”.

Be sure power switch is in the “OFF” position and the electrical cord has been disconnected from the receptacle.

1. Assembling (Fig. 2)

(1)Turn the polisher upsidedown so that the spindle is facing upward.

(2)Insert the washer nut through the rubber pad and thread it onto the spindle.

(3)Press the lock lever to secure the spindle and tighten the washer nut with a wrench.

(4)Wrap the rubber pad with the hood of the wool bonnet and firmly secure it by tying a string around it. Be sure the excess string is firmly tucked inside the wool bonnet to prevent it from flying out while polishing.

The unbalanced fitting of the wool bonnet may cause the vibration (Fig. 3).

CAUTION:

⬤Improper fitting of the wool bonnet may cause vibration.

⬤Tighten the washer nut securely and confirm that the rubber pad does not wobble.

⬤After releasing the lock lever, check to be sure that it has returned to its normal position.

2.Disassembling

To remove the wool bonnet, follow the above-mentioned procedure in reverse order.

Wool Bonnet	Wrench

Tighten

Washer Nut

Rubber Pad

Spindle

Lock Lever

Fig. 2

Wool Bonnet

Fig. 3

12

Image 12

Contents SP 18SA AvertissementContents Meanings of Signal Words Important InformationSafety General Safety RulesNever operate without all guards in place Use right toolBlades and accessories must be securely mounted to the tool Keep motor air vent cleanOperate power tools at the rated voltage Handle tool correctlySpecific Safety Rules and Symbols Make Them Available to Other Users of this Tool Double Insulation for Safer OperationSpecifications Functional DescriptionName of Parts Assembly and Operation ApplicationsPrior to Operation Polisher Operation Wool Bonnet Assembly and Disassembly Assembling FigDisassembling Improper fitting of the wool bonnet may cause vibrationMaintenance and Inspection Service and repairsInspecting the mounting screws Inspecting the carbon brushes FigAccessories Standard AccessoriesInformations Importantes Signification DES Mots D’AVERTISSEMENTSecurite Regles Generale DE SecuriteConserver CES Instructions Avertissement Lire et coxmprendre toutes les instructionsFrançais Ne jamais toucher les parties mobiles Garder propres les évents d’air du moteurUtiliser l’outil motorisé à la tension nominale Regles DE Securite Specifiques ET Symboles Ne pas essuyer les parties en plastique avec du solvantDouble Isolation Pour UN Fonctionnement Plus SUR Description Fonctionnelle NOM DES PartiesUtilisations Avant L’UTILISATIONUtilisation DE LA Polisseuse Assemblage ET Desassemblage DE LA Peau DE Mouton Précautions après l’utilisationAssemblage. Fig DésassemblageEntretien ET Inspection Accessoires Accessoires StandardInformación Importante Significado DE LAS Palabras DE SeñalizaciónSeguridad Normas Generales DE SeguridadGuarde Estas Instrucciones Advertencia Lea y entienda todas las instruccionesEspañol No toque nunca las piezas móviles Utilice la herramienta correctaManeje con cuidado las herramientas eléctricas Normas Y Símbolos Específicos DE Seguridad No limpie las partes de plástico con disolventeAislamiento Doble Para Ofrecer UNA Operación MÁS Segura Descripción Funcional NomenclaturaEspecificaciones Montaje Y Operación AplicacionesAntes DE LA Operación Operación DE LA Pulidora Montaje Y Desmontaje DE LA Cubierta DE Lana Precaución después de la operaciónMontaje Fig DesmontajeMantenimiento E Inspección Inspección de los tornillos de montajeInspección de la escobillas Fig Mantenimiento y reparaciónAccesorios Accesorios EstándarName Hitachi Koki Canada Co