FEATURES 
This air conditioner is an inverter type unit that automatically adjusts capability as appropriate. Details on these functions are provided below; refer to these descriptions when using the air conditioner.
• Microprocessor Controlled Operation
The interior compartment of the remote control unit contains several features to facilitate automatic operation, easy logically displayed for easy use.
• Simple
The remote control unit has several features to facilitate automatic operation.
•
This timer can be set to automatically turn the unit on or off at any time within a 24 hour period.
•
This timer can be set to automatically turn off the unit at any time after one hour.
• Night Setback
This function saves energy by controlling operation to provide a quieter operating sound than normal.
•Automatic and
Auto/High/Medium/Low
•Air Sweep Control
This function moves a flap up and down in the air outlet, directing air in a sweeping motion around the room and providing comfort in every corner.
• Auto. Flap Control
This automatically sets the flap to the optimum position during heating, cooling, and drying operation.
• Automatic Switching between Cooling and Heating
This unit automatically switches between cooling operation and heating operation according to the difference between the room temperature and the temperature setting.
• Hot Start Heating System
Right from the start, the air is warm and comfortable. This system prevents any cold blasts at the beginning while the heat pump is warming up, or even defrosting.
• Automatic Restart Function for Power Failure
Even when power failure occurs, preset programmed operation can be reactivated once power resumes.
• High Power Operation
If not in Auto Operation, the unit operates at maximum output for 30 minutes, regardless of the desired temperature.
The fan speed is 1 step above “High”.
• Quiet Operation
The fan rotates slower than the fan speed setting to provide a quieter operating sound.
• LED Clean Operation
During operation, the UV
•
This unit is equipped with an
• Air Clean Filter
An air filter that eliminates unpleasant odors and cleans the air is available.
Purchase a replacement filter at your local dealer. (model
• Unoccupied
This function prevents the room temperature from decreasing too much (or increasing too much) when no one is in the room, and operate automatically to save energy.
CONTENTS 
|
| Page |
FEATURES | 2 | |
PRODUCT INFORMATION | 3 | |
ALERT SYMBOLS | 3 | |
INSTALLATION LOCATION | 3 | |
ELECTRICAL REQUIREMENTS | 3 | |
SAFETY INSTRUCTIONS | 3 | |
NAMES OF PARTS | 4 | |
USING THE REMOTE CONTROL UNIT | 8 | |
OPERATION WITH THE REMOTE CONTROL UNIT | 9 | |
1. | Automatic Operation | 9 |
2. | Manual Operation | 9 |
3. | Adjusting the Fan Speed | 10 |
4. | Fan Only | 10 |
5. | Night Setback Mode | 10 |
6. QUIET Mode | 10 | |
7. HIGH POWER Mode | 11 | |
8. LED CLEAN Mode | 11 | |
9. UNOCCUPIED Mode | 11 | |
| Page |
SPECIAL REMARKS | 12 |
SETTING THE TIMER | 13 |
USING THE | 14 |
TIPS FOR ENERGY SAVING | 14 |
ADJUSTING THE AIRFLOW DIRECTION | 15 |
OPERATION WITHOUT THE REMOTE CONTROL UNIT | 15 |
CARE AND CLEANING | 15 |
TROUBLESHOOTING | 17 |
OPERATING RANGE | 17 |
WIRED REMOTE CONTROLLER | 17 |
2 | |
|