Grizzly w1702 instruction manual Shaper Accessories

Page 49

Shaper Accessories

The following shaper accessories may be available through your local Woodstock International Inc. Dealer. If you do not have a dealer in your area, these products are also available through online dealers. Please call or e-mail Woodstock International Inc. Customer Service to get a current listing of dealers at: 1-800 840-8420 or at sales@woodstockint.com.

The W1105 Woodstock Board Buddies® hold down the workpiece on the shaper during cutting operations. These Board Buddies® are made from die-cast aluminum and feature non-marring green neoprene rubber wheels. Because the wheels turn in both directions, they function as hold-downs rather than anti-kickback devices. Mounts to fences 3" to 3-1/2" high x 1" or wider with the optional W1107 12" Tracks or the W1108 24" Tracks.

The W1500 SHOP FOX® Right Angle Jig allows you to make cuts on board ends and various other cuts with complete accuracy and improved safety. Constructed using top quality aluminum castings and plates which are machined to exacting tolerances. It has the perfect weight-use ratio to dampen vibration, yet is still light enough to easily slide the workpiece through the shaping process. Its quality and precision are evident from the first cut.

The D3096 SHOP FOX® Feather Board reduces the risk of kickback and helps achieve consistent shaping results from your shaper. Designed to lock into 3/8" x 3/4" miter gauge slots, these SHOP FOX® Featherboards are adjustable for various stock widths and miter slot locations. No drilling or bulky “C” clamp arrangements needed.

The D2057 SHOP FOX® Adjustable Mobile Base supports your shaper so you can move it easily and lock it in position. Designed for long term and frequent moving of heavy machinery. All SHOP FOX® Adjustable Mobile Bases are the first mobile bases designed strong enough to move heavy machines on a continual basis. The stands are adjustable to fit a variety of machines, and can be leveled without the use of shims or tools.

The SHOP FOX® Heavy-Duty Roller Stands and Roller Tables make your shaper safer and easier to use. All models feature convenient hand knobs for fast height adjustment and offer rigid steel construction. These stands are invaluable for supporting work on shapers. Go to http://www.shopfox.biz/rollerstand.cfm to view all of the available roller tables and stands.

-47-

PARTS

Page 48 Page 50
Image 49
Page 48 Page 50
Contents HP Shaper Page Contents Introduction Woodstock Service and SupportAbout Your New Shaper Specifications Warranty and ReturnsStandard Safety Instructions SafetySafety Additional Safety Instructions for Shapers Use a Shop FOX Featherboard as Avoiding Potential Injuries220V Operation ElectricalExtension Cords GroundingUnpacking AssemblyInventory Beginning Initial CleaningShop Preparation Dust CollectionFence Facing Safety GuardAuxiliary Guard To install the crank handle, do these steps To install the hold-downs, do these stepsHold-Downs HandwheelUnplug the Shaper SpindleThreading drawbar nut onto drawbar To adjust the fence, do these steps AdjustmentsFence Positioning Fence Alignment Table Inserts To adjust the table inserts, do these stepsTo align the pulleys, do these steps Pulley AlignmentChoose Spindle RPM Spindle RPMTo change the spindle RPM, do these steps To check the spindle slide-to-gib clearance, do these steps Spindle Slide and GibStart Up OperationsCutter Direction Forward and reverse switchChoose Cutter Profile and Cutter Cutter InstallationChoose Cutter Height and Spindle Size Choose Spindle and Cutter RPMPlace the spindle washer onto the spindle as shown in Figure To set the spindle height, do these steps Setting Spindle HeightStraight Shaping Operations Rub Collars There are three set up positions for rub collarsStarting pin operation Guard not shown for clarity Freehand ShapingTo make a template, do these steps Pattern ShapingGeneral MaintenanceTable and Base LubricationTroubleshooting Closure Model W1702 220V Wiring Diagram Parts Stand Parts Handle Parts XPR15M Parts XPW02 Lock Washer 3⁄8 Parts Miter Gauge Body HOLD-DOWN BAR Shaper Accessories Shaper Accessories Your Notes Your Notes Warranty Card BOX BELLINGHAM, WA
Top Page Image Contents