Porter-Cable PC15CLS, PC13CSL Additional Specific Safety Rules, Safety Instructions for ALL Saws

Page 3

90539190 REV MAY 2009.qxd 5/27/09 9:22 AM Page 3

facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4)Power tool use and care

a)Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was designed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5)Battery tool use and care

a)Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

b)Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

c)When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

d)Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

6)Service

a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

ADDITIONAL SPECIFIC SAFETY RULES

SAFETY INSTRUCTIONS FOR ALL SAWS

:

a.Keep hands away from cutting area and the blade. Keep your second hand on auxiliary handle, or motor housing. If both hands are holding the saw, they cannot be cut by the blade.

b.Do not reach underneath the workpiece. The guard cannot protect you from the blade below the workpiece.

c.Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of the blade teeth should be visible below the workpiece.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Advertencia Léase Este Instructivo Antes DE Usar EL ProductoCatalog Numbers PC13CSL PC15CSL General Power Tool Safety Warnings Safety Instructions for ALL Saws Additional Specific Safety RulesCauses and Operator Prevention of Kickback Lower Guard Safety InstructionsSafety Instructions Lasers Symbols Safety Guidelines DefinitionsFunctional Description Figure a Tip of tooth 27/09 922 AM 27/09 922 AM ASSEMBLY/ SET-UP Attaching the Blade PC13CSL SwitchKerf Plate Adjustment Figure M OperationLaser Line Accessories TroubleshootingMaintenance Replacement Parts Service and RepairsTechnical Specifications of Laser Three Year Limited WarrantyDE Catalogue PC13CSL PC15CSL Une distraction pourrait vous en faire perdre la maîtrise REV MAY 2009.qxd 5/27/09 922 AM Consignes DE Sécurité Pour Toutes LES Scies Règles DE Sécurité Spécifiques SupplémentairesDirectives DE Sécurité Pour Lasers Consignes DE Sécurité Relatives AU PROTÈGE-LAME InférieurLignes Directrices EN Matière DE Sécurité Définitions IIIa SymbolesRéglage DE L’ANGLE DE Biseau FIG. H MONTAGE/RÉGLAGESoutien DE Grands PANNEAUX/FIXATION DE LA Pièce Réglage DE LA Profondeur DE Coupe FIG. F ET GRetrait DE LA Fraise Dépose DE LA Lame PC13CSL FIG. K ET JAssemblage DE LA Lame PC13CSL FixationTrait Laser FonctionnementDécoupe EN Poche FIG. O DépannageSciage Conseils Pour UNE Utilisation OptimaleGarantie Limitée DE Trois ANS AccessoiresEntretien Pièces DE Rechange Entretien ET RéparationCaractéristiques Techniques DU Laser Remplacement DES Étiquettes D’AVERTISSEMENTCatálogo N PC13CSL PC15CSL REV MAY 2009.qxd 5/27/09 922 AM REV MAY 2009.qxd 5/27/09 922 AM Normas DE Seguridad Específicas Adicionales Causas DEL Retroceso Y SU Prevención POR Parte DEL OperadorInstrucciones DE Seguridad Para Todas LAS Sierras Instrucciones DE Seguridad Para EL Protector Inferior Instrucciones DE Seguridad Para EL LáserPautas DE SEGURIDAD/DEFINICIONES Seguridad SímbolosENSAMBLAJE/CONFIGURACIÓN Extracción FuncionamientoColocación DE LA Hoja PC13CSL ColocaciónLínea Láser Detección DE Problemas Consejos Para UN USO ÓptimoCorte Interno FIG. O Garantía Limitada DE Tres Años MantenimientoPiezas DE Repuesto Mantenimiento Y Reparaciones AccesoriosReemplazo DE LAS Etiquetas DE Advertencia REV MAY 2009.qxd 5/27/09 922 AM REV MAY 2009.qxd 5/27/09 922 AM Especificaciones PC13CSL Especificaciones Técnicas DEL Láser
Top Page Image Contents