GB Key to symbols

Read the entire Operator’s Manual before using or servicing the machine.

Read, understand, and follow all warnings and instructions in this Operator’s Manual and on the machine.

Always wear eye protection, hearing protection, helmet, mask, gloves, trousers and boots when using the machine. A first aid box should always be on hand.

This product is in accordance with applicable EC directives.

Check that the ceiling is strong enough. The ceiling should be solid.

Make sure that the fork grips in the inner pipe, tighten using 24 mm spanner.

Lock the nut using a 30 mm spanner.

Check the lock nut on the L-handle. Tighten until it becomes difficult to turn and so that it can not change due to vibration when horizontal drilling.

The drilling machine must be suitable and designed for the size of drill bit. Max drill bit diameter 150 mm.

Direction of rotation

The drilling machine must be suitable and designed for the size of drill bit.

The drilling machine must conform to applicable regulations, EU- requirements as well as national requirements.

See your instruction manual for your drilling machine Example of a suitable drilling machine: Husqvarna DM 225