Zone Sensor
Zone Sensor Features
Fan Switch (Optional)
The zone sensor fan switch provides the controller with an occupied (and occupied standby) fan request signal of OFF or AUTO. If the fan control request is communicated to the controller, the controller ignores the hardwired fan switch input and uses the communicated value. The zone sensor fan switch signal can be enabled or disabled through configuration in the ZN510 controller.
ON or CANCEL Buttons
Momentarily pressing the ON button
Table 6: Zone Sensor Options
during unoccupied mode places the controller in occupied bypass mode for 120 minutes. You can adjust the number of minutes in the unit controller configuration using Trane’s service tool, Rover. The controller remains in occupied standby mode until the override timer expires or until the CANCEL button is pressed.
Communication Jack
Use the
controller). By accessing the communication jack via Rover, entrance to all controllers on the link may be gained.
Part Number:
X13510628010
Description:
zSpace temperature (0.2 C resolution).
zInternal setpoint.
zCommunication jack.
zVertical case with Trane logo
| RT1 |
|
| ZONE | 1 |
| 10K OHM @ |
|
|
| |
|
|
|
|
| |
| 25 °C ± 2°C |
|
| SIGNAL (COMMON) | 2 |
|
|
|
|
| |
| R7 1K | VR1 | 200 | CSP |
|
|
| 3 | |||
ADJ USTABLE |
|
|
| ||
|
|
|
| ||
SETPOINT |
|
| COMM HIGH (+ ) | 4 | |
|
|
|
|
| |
|
|
|
| COMM LOW | 5 |
|
|
|
|
| |
MJ1 | COMMUNICATIONS |
|
|
|
|
JACK |
|
|
|
| |
|
|
|
|
| |
Part Number:
X13510606010
Description:
zSpace temperature (0.2 C resolution).
zExternal setpoint.
zCommunication jack.
zVertical case with Trane logo
| RT1 |
|
| ZONE | 1 |
| 10K OHM @ |
|
|
| |
|
|
|
|
| |
| 25 °C ± 2°C |
|
| SIGNAL (COMMON) | 2 |
|
|
|
|
| |
| R7 1K | VR1 | 200 | CSP |
|
|
| 3 | |||
ADJUSTABLE |
|
|
| ||
|
|
|
| ||
SETPOINT |
|
| COMM HIGH (+ ) | 4 | |
|
|
|
|
| |
|
|
|
| COMM LOW | 5 |
|
|
|
|
| |
MJ1 | COMMUNICATIONS |
|
|
|
|
JACK |
|
|
|
| |
|
|
|
|
| |
16