Using f11 recovery tools
CAUTION: Using f11 completely erases hard drive contents and reformats the hard drive. All files that you have created and any software that you have installed on the slate are permanently removed. The f11 recovery tool reinstalls the operating system and HP programs and drivers that were installed at the factory. Software not installed at the factory must be reinstalled.
To recover the original hard drive image using f11:
1.If possible, back up all personal files.
2.If possible, check for the presence of the Recovery Image partition: From the Start screen, type pc, and then select This PC.
NOTE: If the Recovery Image partition is not listed, you must recover your operating system and programs using the Windows operating system media and the Driver Recovery media (both purchased separately). For additional information, see Using Windows operating system media (purchased separately) on page 98.
3.If the Recovery Image partition is listed, restart the slate, and then press esc or hold down the volume button while the “Hold the Volume Down button to enter the BIOS Startup Menu” message is displayed at the bottom of the screen.
4.Press or tap f11 while the “Press <F11> for recovery” message is displayed on the screen.
5.Follow the
Using Windows operating system media (purchased separately)
To order a Windows operating system DVD, contact support. See the Worldwide Telephone Numbers booklet included with the slate. You can also find contact information from the HP website. Go to http://www.hp.com/support, select your country or region, and follow the
CAUTION: Using a Windows operating system media completely erases hard drive contents and reformats the hard drive. All files that you have created and any software that you have installed on the slate are permanently removed. When reformatting is complete, the recovery process helps you restore the operating system, as well as drivers, software, and utilities.
To initiate a full install of the operating system using a Windows operating system DVD:
NOTE: This process takes several minutes.
1.If possible, back up all personal files.
2.Insert the Windows operating system DVD into the optical drive, and then restart the slate.
3.When prompted, press any keyboard key.
4.Follow the
After the installation is completed:
1.Eject the Windows operating system media and then insert the Driver Recovery media.
2.Install the Hardware Enabling Drivers first, and then install Recommended Applications.
98 Chapter 9 Backup and recovery – Windows 8