HP x2 1011 G1 manual Docking connector board 793731-001

Page 54

Docking connector board

Description	Spare part number

Docking connector board	793731-001
NOTE: The docking connector board spare part kit does not include the docking connector
board cable. The docking connector board cable is included in the Slate Cable Kit, spare part number
793721-001.

Before removing the docking connector board, follow these steps:

1.Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then shut it down through the operating system.

2.Disconnect the power from the slate by unplugging the power cord from the slate.

3.Disconnect all external devices from the slate.

4.Remove the display panel assembly (see Display panel assembly on page 32).

5.Remove the battery (see Battery on page 36).

Remove the docking connector board:

1.Remove the following screws:

(1)Four Phillips PM1.9×2.5 screws

(2)One Phillips PM1.5×2.3 screw

(3)One Phillips PM1.5×3.5 screw

2.Remove the left alignment post connector bracket (4).

3.Remove the docking connector board bracket (5).

46 Chapter 5 Removal and replacement procedures – slate

Image 54

Contents HP Elite x2 1011 G1 First Edition February Document Part Number Product noticeSafety warning notice Iv Safety warning notice Table of contents Removal and replacement procedures Keyboard base Specifications Backup and recovery Windows Downloading HP PC Hardware Diagnostics Uefi to a USB device114 Product description Product description Security Operating system PreinstalledCategory Description Web-only supportServiceability End user replaceable parts AC adapter External component identification Slate edge componentsComponent Description User guides, select Start Help and Support User GuidesItem Component Slate display components Keyboard base Press the release latchKeys All wireless devices are off LightsNum lock light On Num lock is on TouchPad Left side External drive, printer, scanner or USB hubSmart card reader Supports optional Smart cards Right side Cell phones and MP3 players, even when the slate is off USB 3.0 charging powered portTo use a powered port AC adapter/battery lightIllustrated parts catalog 11.6-in, TouchScreen display panel assembly Slate major componentsComponent Wwan module Volume button boardComponent Spare part number Wlan module805068-001 805070-001805069-001 Solid-state driveDocking connector board Audio jack board includes cableBack cover Description Spare part number Top cover Fingerprint reader boardSmart card reader board Miscellaneous parts Digitizer pen 804346-001Travel keyboard Miscellaneous parts Screw Kit Tools required Removal and replacement preliminary requirementsService considerations Grounding guidelinesTypical electrostatic voltage levels Event 10%55% Packaging and transporting guidelines Equipment guidelines Material Use Voltage protection levelRemoval and replacement procedures slate Slim without digitizer display panel assembly Display panel assemblySlim with digitizer display panel assembly With digitizer display panel assemblyPage Page Page Battery Wlan module Page Wwan module Page Speakers Vibrator module Fan Description Spare part number Fan includes cable 793735-001Volume button board Page Docking connector board Docking connector board 793731-001Page Audio jack board Standard operating system System boardProfessional operating system Operating system805068-601 Page Page Page Page Volume button board cable RTC battery Solid-state drive Page Heat sink Page Rear-facing webcam Front-facing webcam Page Wwan antenna Page Page Wlan antenna WiGig antenna Docking connector board cable Page Removal and replacement procedures Keyboard base Bottom coverKeyboard base battery Power connector cable Keyboard For use in Sweden and Finland Page Fingerprint reader board Fingerprint reader board 793713-001TouchPad Smart card reader board Smart card reader board 793711-001Connector board Connector board includes USB port and DisplayPort 804350-001Keyboard base system board Page Page Fingerprint reader board cable Kickstand Hinge assembly Page Using Slate Setup Starting Slate SetupNavigating and selecting in Slate Setup Restoring factory settings in Slate Setup Updating the Bios Determining the Bios versionUsing MultiBoot About the boot device orderSynchronizing the slate and keyboard Choosing MultiBoot preferences Setting a new boot order in Slate SetupUsing HP PC Hardware Diagnostics Uefi select models only Setting a MultiBoot Express promptDownloading HP PC Hardware Diagnostics Uefi to a USB device Specifications Backup and recovery Windows Performing a system recoveryBacking up your information Using the Windows recovery tools Using f11 recovery tools Using Windows operating system media purchased separatelyUsing Windows Refresh or Windows Reset Using HP Software SetupStatement of Volatility Select the File menu, then Save Changes and ExitHard Disk Drive HDD Data when Memory? Protected? Power is Removed? Non-volatile memory usageIssue Non-volatile memory usageQuestions and answers Page Creating recovery media and backups Creating recovery media with HP Recovery Disc CreatorGuidelines Creating recovery media Backing up your informationSelect Start All Programs Maintenance Backup and Restore Using f11 recovery tools select models only Using Windows 7 operating system mediaSelect Repair your slate Requirements for specific countries and regions Power cord set requirementsRequirements for all countries Country/region Accredited agency Applicable note numberTaiwan South Korea SwedenSwitzerland United KingdomRecycling Audio jack board Cables, service considerationsIndex Camera flashSpare part numbers Windows

Related manuals

Manual 92 pages 14.19 Kb