Updating the BIOS
Updated versions of the BIOS may be available on the HP website.
Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs.
Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file.
Determining the BIOS version
To determine whether available BIOS updates contain later BIOS versions than those currently installed on the slate, you need to know the version of the system BIOS currently installed.
BIOS version information (also known as ROM date and System BIOS) can be revealed by pressing fn+esc (if you are already in Windows) or by using Slate Setup.
1.Start Slate Setup.
2.Use a pointing device, the arrow keys, or touch the screen to select Main > System Information.
3.To exit Slate Setup without saving your changes, click the Exit icon in the
– or –
Select Main > Ignore Changes and Exit, and then follow the
Downloading a BIOS update
CAUTION: To reduce the risk of damage to the slate or an unsuccessful installation, download and install a BIOS update only when the slate is connected to reliable external power using the AC adapter. Do not download or install a BIOS update while the slate is running on battery power, docked in an optional docking device, or connected to an optional power source. During the download and installation, follow these instructions:
Do not disconnect power on the slate by unplugging the power cord from the AC outlet. Do not shut down the slate or initiate Sleep.
Do not insert, remove, connect, or disconnect any device, cable, or cord.
1.Access Help and Support by selecting Start > Help and Support.
2.Select Updates and
3.At the download area, follow these steps:
a.Identify the most recent BIOS update and compare it to the BIOS version currently installed on your slate. Make a note of the date, name, or other identifier. You may need this information to locate the update later, after it has been downloaded to your hard drive.
b.Follow the
If the update is more recent than your BIOS, make a note of the path to the location on your hard drive where the BIOS update is downloaded. You will need to access this path when you are ready to install the update.
NOTE: If you connect your slate to a network, consult the network administrator before installing any software updates, especially system BIOS updates.
BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the download is complete. If no instructions are revealed, follow these steps:
90 Chapter 7 Slate Setup (BIOS), MultiBoot, and HP PC Hardware Diagnostics (UEFI) – Windows 8