HP x2 1011 G1 manual USB 3.0 charging powered port, To use a powered port, Dual-Mode DisplayPort

Item	Component	Description
(5)	SIM/SD card release access	A pinhole for use in ejecting the door covering the SIM and SD
		card slots.
(6)	USB 3.0 charging (powered) port	Connects an optional USB device, such as a keyboard, mouse,
		external drive, printer, scanner or USB hub. Standard USB
		ports will not charge all USB devices or will charge using a
		low current. Some USB devices require power and require you
		to use a powered port.
		NOTE: USB charging ports can also charge select models of
		cell phones and MP3 players, even when the slate is off.
(7)	Dual-Mode DisplayPort	Connects an optional digital display device, such as a high-
		performance monitor or projector.
(8)	AC adapter/battery light	●	White: The slate is connected to external power and
			the battery is charged from 90 to 99 percent.
		●	Amber: The slate is connected to external power and
			the battery is charged from 0 to 90 percent.
		●	Blinking amber: A battery that is the only available
			power source has reached a low battery level. When
			the battery reaches a critical battery level, the battery
			light begins blinking rapidly.
		●	Off: The battery is fully charged.
(9)	Power connector	Connects an AC adapter.

*The antennas are not visible on the outside of the slate. For optimal transmission, keep the areas immediately around the antennas free from obstructions. To see wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. To access the user guides, select Start > Help and Support > User Guides.

Right side 15