Using the Windows recovery tools
To recover information you previously backed up, see Windows Help and Support for steps on restoring files and folders.
To recover your information using Automatic Repair, follow these steps:
CAUTION: Some Startup Repair options will completely erase and reformat the hard drive. All files you have created and any software installed on the slate are permanently removed. When reformatting is complete, the recovery process restores the operating system, as well as the drivers, software, and utilities from the backup used for recovery.
1.If possible, back up all personal files.
2.If possible, check for the presence of the Recovery Image partition and the Windows partition. From the Start screen, type file, and then click File Explorer.
– or –
From the Start screen, type pc, and then select This PC.
NOTE: If the Windows partition and the Recovery Image partition are not listed, you must recover your operating system and programs using the Windows operating system DVD and the Driver Recovery media (both purchased separately). For additional information, see Using Windows operating system media (purchased separately) on page 98.
3.If the Windows partition and the Recovery Image partition are listed, restart the slate by pressing and holding the shift key while clicking Restart.
4.Select Troubleshoot, then select Advanced Options, and then select Startup Repair.
5.Follow the
NOTE: For additional information on recovering information using the Windows tools, perform a search for these topics in Windows Help and Support.
Performing a system recovery 97