HP Server tc2110 manual Troubleshooting Checklist

Page 64

Chapter 6

Maintenance and Troubleshooting

www.hp.com and search for the specific product. These instructions do not generally cover third-party components or devices. Refer to the documentation that comes with the third-party device for diagnostic and troubleshooting information.

CAUTION Always wear an antistatic wrist guard when working inside the HP Server.

￿￿Ensure the HP Server is properly configured. Many HP Server problems are the result of incorrect system and SCSI subsystem configuration settings.

￿￿Check the system BIOS Setup Utility by pressing F2 during the boot process.

￿￿Check the SCSI configuration or the disk array configuration by entering the controller’s setup utility.

￿￿Boot to the HP Server Startup CD for access to configuration tools to help setup the HP Server.

￿￿If it is a network-related error, determine if the user has enough memory and hard disk drive capacity. Run the diagnostics for the NIC. Consult with the network operating system manual.

￿￿If it is a hardware error, follow the instructions to log users off the LAN and power down the HP Server. Reboot and watch for any POST error messages and listen for any beep codes as the HP Server goes through POST then look up the error message in Chapter 5 of this Service manual. If the HP Server passes POST, the HP DiagTools Utility can be used to further test the hardware.

￿￿Use HP DiagTools Utility whenever possible to detect hardware problems. Insert the HP Startup CD- ROM into the CD-ROM drive and reboot the HP Server. Run HP DiagTools from the Startup CD-ROM and verify the Server’s hardware integrity.

Besides HP Server DiagTools, use the standard set of tools recommended for troubleshooting:

￿￿HP Server Assistant (NSA): This is a customizable software toolset that helps monitor and manage HP Servers over the network from and HP OpenView console. The NSA software has a server part and a management console, or client part.

￿￿Toptools: HP Instant Toptools provides a set of web-based management tools that can be used to maintain and control the HP Servers that are running Microsoft Windows 2000, Novell NetWare/IntranetWare, or SCO UNIX.

Troubleshooting Checklist

1.Verify the error. Make sure it is not an erroneous error message. Is the error repeatable? Is the error message seen affecting the HP Server’s operation or performance?

2.Always change only one component at a time.

3.Always check the most recently added items added, both hardware and software. Remove any third- party components.

4.Make sure the HP Server BIOS is updated to the latest version posted to HP’s external website. Flashing/updating the system BIOS and clearing CMOS will resolve many different issues.

5.Make sure the firmware for the hard drives are kept current. Download and run the Hard Disk Drive Firmware Utility to verify if hard drive firmwares need to be updated. This utility is available from HP’s external website.

6.Make sure all firmware/BIOS revisions on any controllers are kept current.

7.Use only HP-provided drivers for any HP devices used in the HP Server. This includes using HP drivers for the initial installation of any NOS (Network Operating System) that is supported on the specific HP Server.

8.Check all cable and power connections, including those in the rack. If the HP Server is not powering on, unplug the AC power cords and wait 20 seconds then plug the AC power cords in again and restart the HP Server. Check for normal operation.

9.Verify that all cables and boards are securely plugged into their appropriate connectors and slots.

If the problem still persists:

58

Image 64
Contents HP Server tc2110 Operations and Maintenance Guide Audience Assumptions Contents Error! Bookmark not defined ContentsServer stops working hangs 105 109Controls and Indicators Front PanelAdditional Controls and Indicators Sleep LEDRear Panel Applying Power to the HP Server Connecting the Power CordsSetting the input voltage Powering-Up the ServerConnecting the Power Cords Connecting Power to Multiple-Server Configurations Powering-Down the ServerSleep States Acpi Chapter Page Mini-DIN PS/2 Connectors External ConnectorsSerial Port Connector Parallel Port Connector USB ConnectorPin LVD Scsi Port Connector Low Voltage Differential Pin 1 LVD Scsi Connector MalePin Narrow Scsi Port Connector Accessory Board PositionStandard LAN Connector Page Opening and Closing the HP Server Installing and ConfiguringRemoving the Left Side Cover Replacing the Left Side Cover Removing the Left Side CoverRemoving the Upper Bezel Replacing the Left Side CoverReplacing the Upper Bezel Removing the Upper Front BezelMass Storage Replacing the Upper BezelMass Storage Guidelines Mass Storage LocationsIDE Controller Configuration Boot PriorityIDE Mass Storage Devices Scsi Mass Storage Devices Scsi Controller ConfigurationIDE Mass Storage Additions Installing a Second Hard Disk Drive Drive Cage Mounted Scsi Mass Storage AdditionsReleasing the Retaining Clips Installing a Third Hard Disk Drive Tray Mounted Drive Cage MountingInstalling an Optional CD-ROM or DVD Drive Installing a Disk Drive Tray Mounted10. Installing an Optional CD-ROM or DVD Drive Installing an Optional Backup Tape Drive Memory Modules Memory Installation GuidelinesTools Required Installing Additional DIMMs 12. Dimm Locations on System Board Processor Removing DIMMsRemoving the Heat Sink and Cooling Fan 15. Removing Heat Sink and Cooling FanRemoving the Processor Replacing the ProcessorReplacing the Heat Sink and Cooling Fan 17. Replacing the ProcessorAccessory Boards Tested PCI BoardsIRQ Settings GuidelinesInstalling an Accessory Board Particular accessory board type 21. Removing the Slot Cover Connecting Peripheral Devices Removing Accessory BoardsUninterruptible Power Supply UPS Monitor, Keyboard, and MouseAccessing the HP Startup CD-ROM Configuring the HP Server tc2110HP Startup CD-ROM Bios Setup Utility Contents of the HP Startup CD-ROMNOS Installation DiagtoolsViewing the Summary Configuration Screen Accessing the Setup UtilityMenu Bar Using the Setup Screens Changing the System Date and TimeSetting Boot Passwords Scsi Configuration Utility Diagnostics Power-On Self Test PostNo Error Messages Displayed Post Error MessagesAfter Installing an Accessory General ChecksClearing the Cmos and Passwords Location of Configuration Switches HP Server Diagtools HP Diagtools CapabilitiesAbout Error Messages Advantages and Limitations of Hardware DiagnosticsHP Toptools Some limitations arePower-On Self Test Post Error Messages Error MessagesBeep Codes Preventive Maintenance Procedures Maintenance and TroubleshootingTroubleshooting Tools Troubleshooting Other Support InformationTroubleshooting Checklist Bios Reset Bios Reset/Update/RecoveryBios Update/Recovery Password Problems Clearing the Bios ConfigurationSupervisor Password User PasswordConfiguration and Password Switch Location Operating System Not Found Message AppearsPower Problems Server Stops or Hangs While Starting UpVideo/Monitor Problems Configuration Problems Printer ProblemsKeyboard Does Not Work Mouse Does Not WorkFlexible Disk Drive Problems Flexible Disk and Flexible Disk Drive ProblemsEnvironmental problems result from CD-ROM Drawer Will Not Open CD-ROM ProblemsCD-ROM Drive is Not Working Properly Server Will Not Boot From a CD-ROM Disk Scsi ProblemsScsi Controller Does Not Work At Initial Installation Scsi Device Does Not Work After Installation Scsi Device Stops WorkingProcessor Problems Memory ProblemsNetwork Interface Card embedded or PCI Problems LEDs are not lit on the NIC Safety Information Replacing PartsService Tools Required Mass Storage Devices Removing the Flexible Disk DriveReplacing the Flexible Disk Drive Removing the CD-ROMReplacing the CD-ROM Removing the CD-ROMRemoving a Backup Tape Drive Replacing a Backup Tape DriveRemoving a Hard Disk Drive Tray Mounted Replacing a Hard Disk Drive Tray Mounted Removing Hard Disk Drive HDD and TrayRemoving a Hard Disk Drive Drive Cage Mounted DIMMs Replacing a Hard Disk Drive Drive Cage MountedReplacing DIMMs Removing DIMMs from System BoardDimm to Slot Alignment 10. Removing Heat Sink and Cooling Fan 11. Removing the Processor 12. Replacing the Processor 13. Replacing Heat Sink-Cooling Fan on the Processor Replacing Accessory Boards 14. Removing Slot Cover LatchSlot Cover Power Supply Removing the Power SupplyReplacing the Power Supply BatteryRemoving the Battery Chassis Fan Replacing the BatteryRemoving the Chassis Fan Replacing the Chassis Fan 19. Removing the Chassis FanSystem Board Removing the System BoardReplacing the System Board 20. Removing and Replacing the System BoardPage Parts Identification Exploded View Covers and BezelsExploded View Mass Storage Devices Exploded View Chassis Fan, Power Supply, and System Board Exploded View System Board Components Replaceable Parts List Cables and Part Numbers Power Cords KeyboardsPage Specifications Weight and DimensionsPower Supply Specifications EnvironmentalHardware Specifications IDESystem Board Components/Connectors 107 System Board LayoutPage Index AcpiKeyboards Part numbers Scsi ID ZIF
Related manuals
Manual 1 pages 3.34 Kb Manual 4 pages 49.92 Kb Manual 65 pages 57.66 Kb

Server tc2110 specifications

The HP Server tc2110 is a robust and versatile solution designed to meet the needs of small to medium-sized businesses looking for reliability and performance in their IT infrastructure. This server is built on the foundation of HP's renowned engineering, making it a trusted choice for organizations needing dependable server capabilities.

One of the standout features of the HP tc2110 is its scalability. With support for multiple processors, organizations can easily upgrade their server capabilities as their needs grow. This makes it an ideal choice for businesses that anticipate future expansion and require a server that can grow alongside them. The tc2110 supports various Intel Xeon processors, offering excellent processing power and efficiency.

Another significant characteristic of the tc2110 is its high capacity for memory. The server can support substantial RAM, which enhances its multitasking capabilities and allows it to handle demanding applications with ease. This memory capacity is complemented by the server's support for various storage options, including traditional hard drives and modern solid-state drives, enabling businesses to optimize performance and data access speeds according to their specific needs.

The HP Server tc2110 also emphasizes security features, which are critical for today’s evolving cybersecurity landscape. It includes advanced hardware security features such as Trusted Platform Module (TPM) and secure boot, ensuring that data is protected against unauthorized access and potential threats.

In addition to its impressive hardware capabilities, the tc2110 is designed with energy efficiency in mind. Its intelligent cooling technologies and power management features help reduce overall operational costs while maintaining optimal performance. This makes the server not only a powerful option but also a more environmentally friendly choice, aligning with the growing trend towards sustainable IT practices.

Connectivity is another key aspect of the HP tc2110. It offers multiple ports for network connections, ensuring seamless integration into existing IT infrastructures. This connectivity enhances communication between devices and provides businesses with the flexibility to adapt to new technology advancements with ease.

Overall, the HP Server tc2110 is a well-rounded server solution that combines performance, scalability, security, and energy efficiency. Whether for intensive applications, data management, or general computing tasks, the tc2110 stands out as a reliable choice for enterprises seeking to establish or enhance their IT environments. Its blend of features makes it a compelling option for organizations aiming to streamline operations while minimizing costs.