HP Server tc2110 manual Rear Panel

Page 9

Chapter 1Controls and Indicators

NOTE

For more information on the HP Tape Drive and its error codes, refer to the

 

documentation provided with the tape drive or refer to Hewlett-Packard’s web site, at:

 

http://www.hp.com/.

 

 

Rear Panel

The ports, connectors, switches and other related items at the rear of the Server are listed below and shown in Figure 1-3.

￿￿The power connector accepts a standard power cable to connect the HP Server tc2110 with the site power source.

￿￿The input voltage selector switch is used to adapt the power supply to the input line voltage. The two switch settings are 115 volts or 230 volts, and 230 volts is the default setting.

￿￿The mouse port accepts a standard mouse with a PS/2 connector.

￿￿The keyboard port accepts a standard keyboard with a PS/2 connector.

￿￿Two USB ports are provided for printers, external modems, a keyboard and a mouse, but these features are NOS dependent.

￿￿The Serial A and Serial B ports are standard serial ports.

￿￿The Parallel Port is a standard parallel port which supports Extended Capabilities Port (ECP)/Enhanced Parallel Port (EPP).

￿￿The Monitor Port interface specifications are listed in Chapter 9, “Specifications.”

￿￿The SCSI model has an external SCSI port for external SCSI devices provided by the single channel SCSI controller board, but can only be used when no SCSI devices are connected internally.

￿￿Keylock mechanism provides mechanical security for the left side panel to prevent access to the internal components.

￿￿The LAN port is included as an embedded controller based on the Integrated Intel® Pro/100 VE Network Adapter (10 Base-T/100 Base TX LAN Interface). It has a RJ-45 LAN connector on the rear panel.

￿￿System Fan is a variable speed fan controlled by thermal sensors on the system board. The system fan speed can be controlled by the fan speed settings in the (BIOS) Setup Utility.

3

Image 9
Contents HP Server tc2110 Operations and Maintenance Guide Audience Assumptions Contents Contents Error! Bookmark not definedServer stops working hangs 109 105Front Panel Controls and IndicatorsSleep LED Additional Controls and IndicatorsRear Panel Connecting the Power Cords Applying Power to the HP ServerPowering-Up the Server Setting the input voltageConnecting the Power Cords Powering-Down the Server Connecting Power to Multiple-Server ConfigurationsSleep States Acpi Chapter Page External Connectors Mini-DIN PS/2 ConnectorsSerial Port Connector USB Connector Parallel Port ConnectorPin 1 LVD Scsi Connector Male Pin LVD Scsi Port Connector Low Voltage DifferentialPosition Pin Narrow Scsi Port Connector Accessory BoardStandard LAN Connector Page Installing and Configuring Opening and Closing the HP ServerRemoving the Left Side Cover Removing the Left Side Cover Replacing the Left Side CoverReplacing the Left Side Cover Removing the Upper BezelRemoving the Upper Front Bezel Replacing the Upper BezelReplacing the Upper Bezel Mass StorageMass Storage Locations Mass Storage GuidelinesBoot Priority IDE Controller ConfigurationIDE Mass Storage Devices Scsi Controller Configuration Scsi Mass Storage DevicesIDE Mass Storage Additions Scsi Mass Storage Additions Installing a Second Hard Disk Drive Drive Cage MountedReleasing the Retaining Clips Drive Cage Mounting Installing a Third Hard Disk Drive Tray MountedInstalling a Disk Drive Tray Mounted Installing an Optional CD-ROM or DVD Drive10. Installing an Optional CD-ROM or DVD Drive Installing an Optional Backup Tape Drive Memory Installation Guidelines Memory ModulesTools Required Installing Additional DIMMs 12. Dimm Locations on System Board Removing DIMMs Processor15. Removing Heat Sink and Cooling Fan Removing the Heat Sink and Cooling FanReplacing the Processor Removing the Processor17. Replacing the Processor Replacing the Heat Sink and Cooling FanTested PCI Boards Accessory BoardsGuidelines IRQ SettingsInstalling an Accessory Board Particular accessory board type 21. Removing the Slot Cover Removing Accessory Boards Connecting Peripheral DevicesMonitor, Keyboard, and Mouse Uninterruptible Power Supply UPSConfiguring the HP Server tc2110 Accessing the HP Startup CD-ROMHP Startup CD-ROM Contents of the HP Startup CD-ROM Bios Setup UtilityNOS Installation DiagtoolsAccessing the Setup Utility Viewing the Summary Configuration ScreenMenu Bar Changing the System Date and Time Using the Setup ScreensSetting Boot Passwords Scsi Configuration Utility Power-On Self Test Post DiagnosticsPost Error Messages No Error Messages DisplayedAfter Installing an Accessory General ChecksClearing the Cmos and Passwords Location of Configuration Switches HP Diagtools Capabilities HP Server DiagtoolsAdvantages and Limitations of Hardware Diagnostics About Error MessagesHP Toptools Some limitations areError Messages Power-On Self Test Post Error MessagesBeep Codes Maintenance and Troubleshooting Preventive Maintenance ProceduresTroubleshooting Tools Other Support Information TroubleshootingTroubleshooting Checklist Bios Reset/Update/Recovery Bios ResetBios Update/Recovery Clearing the Bios Configuration Password ProblemsSupervisor Password User PasswordOperating System Not Found Message Appears Configuration and Password Switch LocationServer Stops or Hangs While Starting Up Power ProblemsVideo/Monitor Problems Printer Problems Configuration ProblemsMouse Does Not Work Keyboard Does Not WorkFlexible Disk and Flexible Disk Drive Problems Flexible Disk Drive ProblemsEnvironmental problems result from CD-ROM Problems CD-ROM Drawer Will Not OpenCD-ROM Drive is Not Working Properly Scsi Problems Server Will Not Boot From a CD-ROM DiskScsi Controller Does Not Work At Initial Installation Scsi Device Stops Working Scsi Device Does Not Work After InstallationMemory Problems Processor ProblemsNetwork Interface Card embedded or PCI Problems LEDs are not lit on the NIC Replacing Parts Safety InformationService Tools Required Removing the Flexible Disk Drive Mass Storage DevicesRemoving the CD-ROM Replacing the Flexible Disk DriveRemoving the CD-ROM Replacing the CD-ROMReplacing a Backup Tape Drive Removing a Backup Tape DriveRemoving a Hard Disk Drive Tray Mounted Removing Hard Disk Drive HDD and Tray Replacing a Hard Disk Drive Tray MountedRemoving a Hard Disk Drive Drive Cage Mounted Replacing a Hard Disk Drive Drive Cage Mounted DIMMsRemoving DIMMs from System Board Replacing DIMMsDimm to Slot Alignment 10. Removing Heat Sink and Cooling Fan 11. Removing the Processor 12. Replacing the Processor 13. Replacing Heat Sink-Cooling Fan on the Processor 14. Removing Slot Cover Latch Replacing Accessory BoardsSlot Cover Removing the Power Supply Power SupplyBattery Replacing the Power SupplyRemoving the Battery Replacing the Battery Chassis FanRemoving the Chassis Fan 19. Removing the Chassis Fan Replacing the Chassis FanRemoving the System Board System Board20. Removing and Replacing the System Board Replacing the System BoardPage Exploded View Covers and Bezels Parts IdentificationExploded View Mass Storage Devices Exploded View Chassis Fan, Power Supply, and System Board Exploded View System Board Components Replaceable Parts List Cables and Part Numbers Keyboards Power CordsPage Weight and Dimensions SpecificationsPower Supply Specifications EnvironmentalIDE Hardware SpecificationsSystem Board Layout System Board Components/Connectors 107Page Acpi IndexKeyboards Part numbers Scsi ID ZIF
Related manuals
Manual 1 pages 3.34 Kb Manual 4 pages 49.92 Kb Manual 65 pages 57.66 Kb

Server tc2110 specifications

The HP Server tc2110 is a robust and versatile solution designed to meet the needs of small to medium-sized businesses looking for reliability and performance in their IT infrastructure. This server is built on the foundation of HP's renowned engineering, making it a trusted choice for organizations needing dependable server capabilities.

One of the standout features of the HP tc2110 is its scalability. With support for multiple processors, organizations can easily upgrade their server capabilities as their needs grow. This makes it an ideal choice for businesses that anticipate future expansion and require a server that can grow alongside them. The tc2110 supports various Intel Xeon processors, offering excellent processing power and efficiency.

Another significant characteristic of the tc2110 is its high capacity for memory. The server can support substantial RAM, which enhances its multitasking capabilities and allows it to handle demanding applications with ease. This memory capacity is complemented by the server's support for various storage options, including traditional hard drives and modern solid-state drives, enabling businesses to optimize performance and data access speeds according to their specific needs.

The HP Server tc2110 also emphasizes security features, which are critical for today’s evolving cybersecurity landscape. It includes advanced hardware security features such as Trusted Platform Module (TPM) and secure boot, ensuring that data is protected against unauthorized access and potential threats.

In addition to its impressive hardware capabilities, the tc2110 is designed with energy efficiency in mind. Its intelligent cooling technologies and power management features help reduce overall operational costs while maintaining optimal performance. This makes the server not only a powerful option but also a more environmentally friendly choice, aligning with the growing trend towards sustainable IT practices.

Connectivity is another key aspect of the HP tc2110. It offers multiple ports for network connections, ensuring seamless integration into existing IT infrastructures. This connectivity enhances communication between devices and provides businesses with the flexibility to adapt to new technology advancements with ease.

Overall, the HP Server tc2110 is a well-rounded server solution that combines performance, scalability, security, and energy efficiency. Whether for intensive applications, data management, or general computing tasks, the tc2110 stands out as a reliable choice for enterprises seeking to establish or enhance their IT environments. Its blend of features makes it a compelling option for organizations aiming to streamline operations while minimizing costs.