2.Remove the four support beams. Be careful that the support beams do not fall into the crate.
3.Use a Phillips screwdriver to remove the remaining screws that secure the side panels.
4.Carefully remove the panels and open the plastic bag surrounding the printer and free it from the printer.
Remove the printer from the pallet
Manpower | Tools | Time |
|
|
|
1 person | Two M30 sockets, M17 socket wrench, | 10 minutes |
| cutter, forklift |
|
|
|
|
|
|
|
1.Remove the 8 Phillips screws that secure the items box and remove it.
NOTE: The starter kit weighs 60 kg. Two people are needed to lift it.
2.Remove the PC box and the disassembled covers.
3.LX800 only: Remove the Ink Collector Ink.
4.Use the 17 mm socket wrench to remove the spindle.
5.Lift the spindle away from the pallet.
NOTE: If you must lift the printer with a crane or perform difficult maneuvers, use tape to prevent the door from opening accidentally.
ENWW | Remove the printer from the pallet 11 |