HP 7000 Document manual Scanner paper path problems, Paper does not feed from the scanner

Page 27

Scanner paper path problems

Use this section to help resolve paper path issues that might occur when scanning.

●Paper jamming, skewing, misfeeds, or multiple-page feeds

●Paper does not feed from the scanner

●The bottom of the scanned image is cut off

●The scanned images have streaks or scratches

●An item loaded in the scanner jams repeatedly

●Clear jams from the scanner paper path

●Replace the feed-roller assembly

Paper jamming, skewing, misfeeds, or multiple-page feeds

●If the pages look skewed as they feed into the scanner paper path, check the resulting scanned images in the software to ensure that they are not skewed.

●The pages might not be placed correctly. Straighten the pages and adjust the paper guides to center the stack.

●The paper guides must be touching the sides of the paper stack to work properly. Please ensure that the paper stack is straight and the guides are against the paper stack.

●The document feeder or output tray might contain more than the maximum number of pages. Load fewer pages in the document feeder, and remove pages from the output tray.

●Check to see that the scanner hatch is fully closed.

●Clean the scanner paper path to help reduce misfeeds. If this does not help, install the feed-roller assembly replacement kit. The feed-roller assembly replacement kit contains a feed-roller mechanism and a separation pad. For more information, see Replace the feed-roller assembly.

Paper does not feed from the scanner

The scanner hatch might not be securely latched. Open the scanner hatch and then close it by pressing firmly.

A problem with the scanner hardware might exist. Follow this procedure to test the scanner:

1.Ensure that the power supply is securely connected between the scanner and a live electrical outlet or surge protector. Check that the green LED on the power supply connector is on to verify that the power supply is functional.

2.If the power supply is connected to a surge protector, ensure that the surge protector is plugged into an outlet and turned on.

3.Disconnect the power supply from the scanner and turn off the computer. After 60 seconds, reconnect the power supply to the scanner and then turn on the computer, in that order.

4.Try to rescan.

5.If the paper still does not feed properly, see the Product Support section of the printed Setup and Support Guide that came with the scanner.

User Guide

25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents HP Scanjet Page Contents What you can do with the scanner FeatureHP Scanjet 7800 Scanner User GuideScanner front panel buttons Scanner hardwareScanning software Power rocker switchCancel Button Settings Click Printable Setup and Support GuideSecond window Button Settings UtilityHP Smart Document Scan Software Main windowPrintable version of this guide Where to get additional informationHP Scanjet 7800 Setup and Support Guide Other software programsLCD Reader AccessibilityButton Disable Utility Screen-readable user guide in other languagesChapter Set up profiles Set up a profile with HP Smart Document Scan SoftwareClick Continue Assign profile numbers with the Button Settings Utility Modify a profile with HP Smart Document Scan SoftwareImport and export profiles User Guide Scan two-sided originals Scan and copyBasic scanning steps Basic copying stepsScan a card in the card slot Load originalsChoose acceptable paper Load originals in the document feeder Use the scanner buttons Scan Document To buttonCopy button Scan from other software programs Button Settings buttonCancel button Scan from HP Smart Document Scan SoftwareClean the scanner glass Care and maintenanceButton Settings Utility General info tab Order maintenance and scanning suppliesUse the HP paper-path cleaning cloth Clean the feed-roller assembly manually Chapter Scanner has stopped working correctly TroubleshootingScanner initialization or hardware problems Reset the scannerAction Scanner operation problemsCheck the cables Cable typeScanned image is fuzzy Scanner will not turn onScanner lamp stays on Scanner does not scan right awayVertical white stripes appear on the printed An unexpected program opens when a button is pressedScanner buttons are not working correctly Scanned images are not straightScanner paper path problems Paper jamming, skewing, misfeeds, or multiple-page feedsPaper does not feed from the scanner Clear jams from the scanner paper path Bottom of the scanned image is cut offScanned images have streaks or scratches An item loaded in the scanner jams repeatedlyContact HP Support Replace the feed-roller assemblyChapter
Top Page Image Contents