Chapter 8
A blank page came out of the printer.
Solution
●Check the
●You may have begun printing and then cancelled the process. If you cancelled the process before the photo started printing, the printer may have already loaded paper in preparation for printing. The next time you print, the printer will eject the blank page before starting the new printing project.
The photo did not print using the printer's default print settings.
Solution You may have changed the print settings for the selected photo. Print settings you apply to an individual photo override the printer's default print settings. Discard all print settings that have been applied to an individual photo by deselecting the photo. For more information, see Select multiple photos.
The printer ejected the paper when preparing to print.
Cause The printer might be in direct sunlight, which affects the operation of the automatic paper sensor.
Solution Move the printer out of direct sunlight.
Print quality is poor.
Solution
●Make sure you have selected the correct paper type. See To change the paper type.
●Make sure the print quality setting is set to Best quality. See Set print quality.
●Turn the Photo Fix feature on or off. See Perfect photos automatically using Photo Fix.
●The print cartridge may be running out of ink. Check the
●You may have selected a
●Make sure you are using the right type of photo paper for the project. Use HP Advanced Photo Paper for best results. For more information, see Choose the right paper.
●You may be printing on the wrong side of the paper. Make sure the paper is loaded with the side to be printed facing toward the front of the printer.
●The print cartridge may need to be cleaned. For more information, see Automatically clean the print cartridge.
46 | HP Photosmart A610 series |