To clean the print cartridge contacts
1.Gather the following items to clean the contacts:
•Distilled water (tap water may contain contaminants that can damage the print cartridge)
•Cotton swabs or other soft,
2.Open the print cartridge door.
3.Remove the print cartridge and place it on a piece of paper with the ink nozzle plate facing up. Be careful not to touch the
CAUTION: Do not leave the print cartridge outside the printer for more than 30 minutes. Ink nozzles exposed to the air longer than this may dry out and cause printing problems.
4.Lightly moisten a cotton swab with distilled water and squeeze any excess water from the swab.
5.Gently wipe the
CAUTION: Do not touch the ink nozzle plate. Touching the ink nozzle plate will result in clogs, ink failure, and bad electrical connections.
1
Clean copper colored contacts with swab
2Ink nozzle plate
6.Repeat steps 4 and 5 until no ink residue or dust appears on a clean swab.
7.Insert the print cartridge in the printer, and then close the print cartridge door.
Align the print cartridge
The first time you insert a HP 110
NOTE: If you have installed the HP Photosmart software, HP recommends aligning the print cartridge from the software because it is easier. See the electronic Help for instructions.
Clean and maintain the printer | 21 |