"Cover open," "Printer top cover is open," or "Ink cover open." Cause: The print cartridge door may be open or ajar. Solution: Close the print cartridge door to continue printing.
"Hardware error" or "Fatal error." Cause: A serious error has occurred.
Solution: Turn the printer off and then on again, and then try printing your photo again.
Cause: There may be no print cartridge in the printer, the print cartridge may be incompatible, or the print cartridge may be empty or low on ink.
Solution: Make sure that an HP 110
on page 15.
Cause: The paper is not loaded correctly, the paper is jammed, or the printer is out of paper.
Solution: Check to make sure that paper is correctly loaded in the input tray. For information about how to load paper, see “Choose and load paper” on page 9.
If paper is jammed in the printer, try the following solutions:
•If the paper came part way through the front of the printer, gently pull the paper towards you to remove it.
•If the paper did not come part way through the front of the printer, try the following solutions:
•Remove the paper from the input tray.
•Gently pull the jammed paper to remove it from the back of the printer.
•If you cannot grasp the edge of the jammed paper to remove it, try the following:
•Turn off the printer.
•Unplug the printer power cord. Wait about 30 seconds, and then plug the power cord back in.
•Turn on the printer. The printer checks for paper in the paper path and will automatically eject the jammed paper.
When you fix the problem, press OK to continue printing.
PictBridge camera error messages | 33 |