Load the photo tray
The photo tray supports the following media:
●10 x 15 cm (4 x 6 inch) photo paper (with or without tab)
●13 x 18 cm (5 x 7 inch) photo paper
●Index cards
●Hagaki cards
Follow the steps to load the photo tray:
1.Press the output tray latch from below and lift upwards to separate the output tray from the photo tray.
2.Raise the output tray.
3.Remove any paper that is loaded in the photo tray.
4.Slide the
5.Load up to 20 sheets of photo paper into the photo tray with the side to be printed facing down. Slide the paper in until it stops.
Note Align the paper to the right edge of the tray.
6.Slide the
HP Photosmart D5100 series User Guide | 11 |