If your printer is connected to a network
1.Open the printer's embedded Web server (EWS).
2.Click the Bluetooth tab.
3.Configure the settings you want, and then click Apply.
The following table describes the Bluetooth settings:
Option
Device Address
Device Name
Passkey/PIN
Reset Bluetooth
Visibility
Security Level
Description
The MAC address of your Bluetooth wireless printer adapter.
Note You cannot change this address.
The device name assigned to the printer so that other Bluetooth devices can identify it.
The
To change the Passkey
●HP Printer Utility: Click Change PIN Code, and then enter a new
●EWS: Enter a new
To reset Bluetooth to factory default settings
●HP Printer Utility: Click Reset Device Access.
●EWS: Click Yes, reset Bluetooth.
To select the printer's visibility to other Bluetooth devices
●HP Printer Utility: Select one of the following options:
–Private Mode: Only sending devices that have stored the printer's Bluetooth device address can discover and use the printer.
–Public Mode: Any Bluetooth device within range can discover and use the printer.
●EWS: Select one of the following options:
–Visible to All: Any Bluetooth device within range can print to the printer.
–Not Visible: Only Bluetooth devices that have stored the device address of the printer can print to it.
To set the level of security
●HP Printer Utility: Select the Encryption Required check box to require a passkey from a Bluetooth device within
User's guide | 55 |