HP | 2500C/CM Step 2 - Remove All Tapes from the Printer |
1. |
Remove the four tapes securing the printer. Open the top cover and remove the fifth tape from the inside of the printer.
HP | 2500C/CM | Step 3 - Connect Cables |
1.Ensure that the computer is turned off.
2. Plug the power connector firmly into the printer’s power socket. 3. Plug the power plug into an electrical outlet.
To connect the printer directly to the computer:
1.Connect the printer end of the parallel cable firmly to the parallel port on the printer.
2.Snap both clips onto the notches on the connector.
3.Connect the computer end of the parallel port on your computer and tighten the screws on the connector.
The HP 2500CM Professional Series Color Printer comes with a
HP JetDirect internal print server.
To connect the HP 2500CM printer to the network, plug the network cable into the network port on the print server. For more information on configuring the printer in a network environment, refer to the Network Guide which is available on your HP 2500C/CM Starter CD.
5