HP 7550 manual Problem Possible cause Solution

Problem	Possible cause	Solution
The document or	The printer’s default	Windows PC
photo did not print	print settings may	• From the application’s File menu, select
using the selected	be different than the	Print, then click Properties to set the
print settings.	application’s print	desired print settings.
	settings. An	Macintosh
	application’s print
		• From the application’s File menu, select
	settings override the
		Print and set the desired print settings.
	printer’s default
	settings.
	You may have set	1 Deselect the photo if it is not already
	the print settings	deselected.
	differently for an	2 Set the printer’s default settings to your
	individual photo;	liking, then print the photo again. The
	these settings	photo should print using the defaults.
	override the
	printer’s default
	settings.
The paper type is	The printer may be	Move the printer out of direct sunlight.
set as Automatic,	placed in direct
but when preparing	sunlight, which
to print, the printer	overwhelms the
ejects the paper.	automatic paper
	sensor.
Parts of the	You may have	Windows PC
document are	selected the	• Make sure you have selected the
missing or are in	incorrect paper	correct orientation (portrait or
the wrong place.	orientation.	landscape) on the Layout tab of the
(continued on next		printer Properties dialog box and in the
page)		application’s Page Setup dialog box.
		Macintosh
		• Make sure you have selected the
		correct orientation (portrait or
		landscape) in the Page Setup dialog
		box.

troubleshooting: printing problems 43