HP 7550 manual Problem Possible cause Solution

Problem	Possible cause	Solution
(continued from	You may have	Turn these settings off to speed up the
previous page)	selected the	printing process. For more information,
Printing is very	Improve colors or	see the set defaults on your printer section
slow.	Extend colors	of Printer Help.
	settings from the
	printer’s control
	panel.
The printer will not	The printer may	Unplug the printer’s power cord and wait
turn on.	have drawn too	approximately 10 seconds. Reconnect the
	much power.	power cord and press the POWER button
		to turn the printer on.
	The printer is	Turn the power strip on.
	plugged into a
	power strip and the
	power strip is
	turned off.
The Print light is	The printer may be	Be patient. The printer needs some time to
blinking green but	processing	finish processing the information.
the printer is not	information.
printing.
The Print light is	The printer needs	Try the following:
blinking amber.	attention.	1 Check the printer’s LCD and the
		computer monitor for instructions.
		2 If this does not work, and you have a
		digital camera connected to the printer,
		check the camera’s LCD for
		instructions.
		3 If this does not work, turn the printer
		off. Unplug the printer’s power cord,
		wait one minute, then plug it in again.
		Turn the printer on.

38 basics guide