HP TippingPoint Next Generation Firewall manual Nicsettings, Notify, Ntp, Password

Page 20

Usage

nic

Related Commands

dns, ntp

nicsettings

Interactive command that prompts you for the SMS NIC configuration settings and is available through the CLI and OBE If you want to make changes individually to any of the NIC settings, the SMS provides options for setting auto negotiation, port speed, and duplex mode.

Example

sms110 SMS=> nicsettings

The Ethernet NIC used for the network management interface is configurable. Please verify the port configuration of the network device that this SMS is connected to before making changes. These values may be changed at a later time with the 'set net' command.

Host autoneg: yes

Host speed: 1000

System duplex: full

Enter: [A]ccept, [C]hange, or [E]xit without saving? <[A],C,E>:

Related Objects

net

notify

The notify command is used to manage the SMS notification service. The command interactively prompts for SMTP e-mail addresses and SNMPv1 traps to a remote trap server.

Usage

notify

Related Objects

smtp, snmp

Related Commands

snmp

ntp

The ntp command is used to manage the NTP (Network Time Protocol) client that synchronizes the SMS server time with a list of specified servers. NTP is enabled by default and is configured with a list of Stratum 1 servers available on the internet. The list of servers can be customized to installation requirements. The SMS server can also act as a NTP server for your devices. The agent can be disabled, but the server cannot. To clear server values, use a period (.).

Usage

ntp

Related Objects

svc

Related Commands

snmp

password

Changes the password for the current user.

10 SMS Command Reference

Image 20
Contents HP TippingPoint Security Management System CLI Reference Unix is a registered trademark of The Open Group Table of Contents SMS Attributes and Objects List of Tables Page About This Guide Document Conventions Document Messages Customer Support Using the Command Line Interface Remote Paths Help Command Lists all commands, objects, and attributes Clear ClsConsole DateFactoryreset DirDns ExitHelp FtpGet Kbdcfg IfconfigIpconfig Mgmtsettings KeyList MonitorNicsettings PasswordNotify NtpPing Reboot Ping6Quit ResolveService-access RestartReverse RoutesSetup SetShutdown SnmpSnmp-request Snmp-trapSnmpget SnmpwalkSsh TimeTouch TracerouteUpdate UsersVersion ‘read-only’Who ViewWeb SMS Attributes and Objects CliCtl To set ctl.upgrade-source , this takes Time that the database was String Read-only Re-initialized High availability Health Indication for Celsius Kbd DesignationLicense Logs NetFor information on set net, see set on Related Commands 11 net Attributes Description Type Access Range Pkg 13 pkg Attributes Description Type Access Range Pwd Radius RadiusRoute PAP, CHAP, MSCHAP, MSCHAP2 EAPMD5Route6 SmtpSHA DES Attrib used to remove an Snmp trap String Write-only TripleDES Examples Snmp.trap-user Svc To true. To disable, set to false Example Sys 24 time Attributes Description Type Access Range SMS Attributes and Objects
Related manuals
Manual 252 pages 61.66 Kb Manual 68 pages 46.8 Kb Manual 54 pages 53.98 Kb