HP TippingPoint Next Generation Firewall manual Route6, Smtp

route6

Collection of attribs used to add, delete and display IPv6 static routes for the management interface

Usage

route6.add

route6.add <destination> <next hop> route6.del <destination> <next hop>

Related Objects

route, net

Related Commands

ifconfig, ipconfig

Table 3-17 route6 Attributes

Attribute	Description	Type	Access	Range
route6.add	Attribute used to add a static route to the IP	IPaddrs	write only	0
	routing table.
	Usage:
	route6.add <destination><next hop>
route6.del	Attribute used to delete a static route from	IPaddrs	write only	0
	the IP routing table.
	Usage:
	route6.del <destination> <next hop>
route6.info	Attribute used to list all routes in the IP	String	read-only	0-1024
	routing table.

smtp

Collection of SMTP (Simple Mail Transfer Protocol) -related attribs. The attribs are used to configure the smtp service.

Table 3-18 smtp Attributes

Attribute	Description	Type	Access	Range
smtp.send-mail	Sends a mail message from the SMS. Other	String	write-only
	SMTP configuration settings are required to
	successfully send mail.
smtp.notify-list	List of e-mail addresses used to deliver	Email	read-write
	notification messages when a notifiable event
	occurs. The list should be one or more e-mail
	addresses separated by comma or semicolons.

snmp

Collection of SNMP (Simple Network Management Procotol) related attribs. The attribs are used to configure the SNMP trap service and SMS SNMPrequest agent. For SNMP requests, see ”snmp-request Attributes” on page 39. For SNMP traps, see ”snmp-trap Attributes” on page 40.

Related Objects

svc

Related Commands

snmp-request, snmp-trap

38 SMS Attributes and Objects