HP TippingPoint Next Generation Firewall manual Des

Table 3-19 snmp-request Attributes

Attribute	Description		Type	Access	Range
snmp.request-priv-proto	Attrib used to specify the privacy protocol for		String	read-write
	the SNMP request agent. When enabled, the
	SMS responds to the SNMP system request.
	Valid protocol values are:
	•	None
	•	AES-128
	•	AES-192
	•	AES-256
	•	DES
	•	Triple_DES
	Example:
	set snmp.request-priv-proto=AES-128
snmp.request-user	Attrib used to specify the user name for the		String	read-write
	SNMP request agent. When enabled, the
	SMS responds to the SNMP system request.
	Example:
	set snmp.request-user=myuser
snmp.request-version	Attrib used to change the version for the		String	write-only
	SNMP request agent. When enabled, the
	SMS responds to the SNMP system request.
	Valid version values are: v2 or v3.
	Example:
	set snmp.request-version=v2
Table 3-20 snmp-trap Attributes
Attribute	Description		Type	Access	Range
snmp.trap-add	Attrib used to add a new SNMP trap		String	write-only
	destination. An IP address and SNMP version
	uniquely identify a destination. The IP
	address must be specified. The SNMP version
	is optional and can be specified when
	separated by a comma.
	Examples:
	set snmp.trap-add=1.1.1.1
	set snmp.trap-add=1.1.1.1,v3
snmp.trap-auth-key	Attrib used to specifiy the authentication		String	write-only
	protocol for an SNMP trap destination. The IP
	address must be specified. The SNMP version
	is optional and can be specified when
	separated by a comma.
	Examples:
	set snmp.trap-auth-key?1.1.1.1=mkey
	set snmp.trap-auth-key?1.1.1.1,v3=
	mykey

40 SMS Attributes and Objects