HP TippingPoint Next Generation Firewall manual Snmp.trap-user

Table 3-20 snmp-trap Attributes

Attribute	Description	Type	Access	Range
snmp.trap-user	Attrib used to specify the user name for an	String	read-write
	SNMP trap destination. The IP address must
	be specified. The SNMP version is optional
	and can be specified when separated by a
	comma.
	Examples:
	set snmp.trap-user?1.1.1.1=testuser
	set snmp.trap-user?1.1.1.1,v3=
	testuser
snmp.trap-version	Attrib used to change the version for an	String	write-only
	SNMP trap destination. The IP address must
	be specified. The SNMP version is optional
	and can be specified when separated by a
	comma. Valid version values are: v2 or v3.
	Examples:
	set snmp.trap-version?1.1.1.1=v3
	set snmp.trap-version?1.1.1.1,v2=v3

Security Management System CLI Reference 43