Pkg

Table 3-12 ntp Attributes

Attribute	Description	Type	Access	Range

ntp.server1	Attribs used to specify a list of NTP time	IPaddr	read-write	0
ntp.server2	servers. The value may be a dotted IP
ntp.server3	address or a hostname. The first entry
	(ntp.server1) will be assigned the preferred
	time server role. The preferred time server is
	also used as a step ticker, which adjusts the
	time immediately upon system boot.
	To clear this value, use a period (.).

ntp.auth-enable	Attrib used to enable/disable the NTP	Bool	read-write	0
	authentication. It allows the NTP client to
	verify that the server is known and trusted
	and not an intruder intending to
	masquerade as that server. We only
	support NTP V3 (symmetric key)
	authentication.
	To enable the NTP authentication, set the
	value to yes, and a key id and key value
	should be provided with the ntp.auth-keyId
	and ntp.auth-keyValue attribs.
	To disable the value, set it to no.
	Example:
	set ntp.auth-enable=yes

ntp.auth-keyId	The ID of key which is used to authenticate	Int	read-write	1-6553
	NTP server if the NTP authentication is			5
	enabled. The ID has to exist in
	/etc/ntp/keys before you set this value.
	To clear this value, use a period (.).
	Example:
	set ntp.auth-keyId=1

ntp.auth-keyValue	The value of key which is used to	String	read-write	1-255
	authenticate NTP server if the NTP
	authentication is enabled. The key has to
	exist in /etc/ntp/keys before you set this
	value.
	To clear this value, use a period (.).
	Example:
	set ntp.auth-keyValue=test

Collection of attribs used to control package management.

Related Object

tmc (object)

Security Management System CLI Reference 33